ISL28408_14 Datasheet, PDF (29/34 Pages) Intersil Corporation – 40V Precision Single Supply Rail-to-Rail Output Low Power Operational Amplifiers

ISL28108, ISL28208, ISL28408
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest Rev.
DATE
REVISION
CHANGE
October 19, 2011
FN6935.3
• On page 6, Thermal Information, changed package temperatures from:
8 Ld SOIC Package (108, 208, Notes 4, 7), θ_JA = 120, θ_JC = 55
8 Ld TDFN Package (108, 208, Notes 5, 6), θ_JA = 47, θ_JC = 6
8 Ld MSOP Package (108, 208, Notes 4, 7), θ_JA = 150, θ_JC = 45
14 Ld SOIC Package (408, Notes 4, 7), θ_JA = -, θ_JA = -
To:
8 Ld SOIC Package (208, Notes 4, 7), θ_JA = 120, θ_JC = 55 and 8 Ld SOIC Package (108, Notes 4, 7), θ_JA =
120, θ_JC = 60
8 Ld TDFN Package (208, Notes 5, 6), θ_JA = 47, θ_JC = 6 and 8 Ld TDFN Package (108, Notes 5, 6), θ_JA = 45,
θ_JC = 3.5
8 Ld MSOP Package (208, Notes 4, 7), θ_JA = 150, θ_JC = 50 and 8 Ld MSOP Package (108, Notes 4, 7), θ_JA =
165, θ_JC = 57
14 Ld SOIC Package (408, Notes 4, 7), θ_JA = 71, θ_JC = 37
•
April 20, 2011
FN6935.2
• Added discussion of ISL28408 throughout datasheet.
• On page 3 in “Ordering Information”: Added new part, “ISL28408FBZ”. Corrected part marking for
ISL28208FRTZ from 208Z to 208F. Added “ISL28408” to Note 3. Under” Pin Configurations,” added
ISL28408 (14 Ld SOIC) pin configuration diagram.
• On page 5: in Pin Descriptions table, added column for ISL28408 14Ld SOIC. Corrected schematic for
Circuit 2.
• On page 6: under “Thermal Information” added "14 Ld SOIC Package (408, Notes 4, 7)" and added
ISL28108 to 8 Ld TDFN and 8 Ld MSOP. Changed θ_JA and θ_JC for 8 Ld TDFN Package from 48 and 5.5 to 47
and 6. Added Note 6 regarding θ_JC “case temp” measurement, and applied it to 8 Ld TDFN Package.
• On page 6: in Electrical Specifications table, changed TYP spec for TCI_B from 70 pA/° C to 0.07nA/° C. On
page 8, changed TYP spec for TCI_B from -67 pA/° C to -0.067nA/° C. These are not spec changes since the
values are the same.
• On page 14, Figs. 31 and 32: changed y axis units label from (mV) to (V); changed x axis units label from
(µA) to (mA).
• On page 21, under “Output Drive Capability,” para 2, changed "The output stage can swing at moderate
levels of output current (Figures 21 and 22) and the output stage is internally current limited. Output
current limit over-termperature..." to "The output stage is internally current limited. Output current limit
over-temperature..."
March 11, 2011
FN6935.1
• On page 1, in the first paragraph - added the following after V-rail: "a rail-to-rail differential input voltage
range for use as a comparator,…"
• On page 1 in “Features:
- Added bullet - “Rail-to-rail input differential voltage range for comparator applications”
- Changed Low Noise Current from "100fA/sq.root Hz" to "80fA/sq.root Hz"
• On page 3 in “Ordering Information” - Removed "coming soon" from ISL28208FRTZ part since it is
releasing.
• On page 6, changed “ESD Tolerance (ISL28208, ISL28408)” as follows:
- Human Body Model changed from "3kV" to "6kV"
- Machine Model changed from "300V" to "400V"
- Added JEDEC Test information for all ESD ratings
• On page 6 and page 8, added test conditions for SOIC TCVos specs. Added TCVos specs for TDFN.
• On page 7 changed “Noise Current Density” Typical from "100" to "80"
• On page 21, updated Applications Information Functional Description
• On page 21 Updated Input Stage Performance Section
• On page 21 Updated Output Drive Capability Section
• On page 22 Added ISL28108 AND ISL28208 SPICE MODEL and License Agreement section
• On page 23 Added SPICE NET LIST
• On page 25 Added Characterization vs Simulation Results curves
February 16, 2011 FN6935.0 Initial Release
Submit Document Feedback ₂₉
FN6935.5
March 4, 2014