ISL59601_14 Datasheet, PDF (27/28 Pages) Intersil Corporation – MegaQ™: An Automatic Composite Video Equalizer,Fully-Adaptive to 1 Mile (1600m)

ISL59601, ISL59602, ISL59603, ISL59604, ISL59605
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
REVISION
CHANGE
August 6, 2012 FN6739.2 Typical applications circuit diagrams and corresponding text updated to reflect more optimal setup for the device.
February 4, 2011
Converted to Updated Intersil Template
page 1 - Updated Related Literature by changing titles to match released application notes
Added standard Reference to MIN and MAX columns and Note to Electrical Specifications and Serial Timing Spec
Tables: "Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or
design."
page 4 - Updated ordering information by naming Evaluation boards to match Intrepid.
CHANGED I2C to SPI as follows:
page 22 first paragraph and 2nd Note paragraph under "Additional Equalization Modes Available with the Serial
Interface" section from "…MegaQ through the I2C interface…" to "…MegaQ through the SPI interface…"
page 23 "Under Lock Until Signal Loss" section 1st paragraph last sentence "…via the I2C interface."
To: "…via the SPI interface."
November 19, 2010 FN6739.1 Modified both "Typical Application" drawings on page 1 to reflect recommended new termination network.
Modified Figures 45, 46, and 47 to reflect recommended new termination network.
Modified text in "UTP Application Circuit" and "Coax Input Circuit" sections to mention changes to termination
network.
Added "Dual UTP/Coax Input Circuit" heading
October 21, 2010
Added superscript TM to all MegaQ and trademark statement, pg 1.
Added ±8kV ESD protection to the Features list
Pg24, Register 0x04 of the Register Listing: Fixed Select and Value locations (were swapped for each pin).
Last two rows should say "Invert", not "INVERT", EXCEPT for "Use the value of INVERT pin
Pg25, address 0x05 of Register listing, 3:2 Noise filter row, change from:
00: No Noise Filtering
01: Min Noise Filtering
1X: Max Noise Filtering
to:
00: No Noise Filtering
01: Min Noise Filtering
10 or 11: Max Noise Filtering
Note: Noise Filtering is only available on the ISL59605
October 8, 2010 FN6739.0 Initial Release.
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a
complete list of Intersil product families.
For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page on
intersil.com: ISL59601, ISL59602, ISL59603, ISL59604, ISL59605.
To report errors or suggestions for this datasheet, please go to: www.intersil.com/askourstaff
FITs are available from our website at: http://rel.intersil.com/reports/sear
27
FN6739.2
September 5, 2012