ISL28407_15 Datasheet, PDF (25/31 Pages) Intersil Corporation – Precision Single, Dual and Quad Low Noise Operational Amplifiers

ISL28107, ISL28207, ISL28407
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that
you have the latest revision.
DATE
REVISION
CHANGE
September 29, 2015
FN6631.8 - Updated Ordering Information Table on page 5.
- Updated About Intersil Verbiage.
-Updated POD L8.3X3K to most current revision with changes as follows:
-Revision 1 to Revision 2 Changes:
Tiebar Note 5 updated
From: Tiebar shown (if present) is a non-functional feature.
To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or ends).
February 11, 2013
FN6631.7 Removed following parts from datasheet and updated accordingly throughout:
ISL28407FRZ, 16 Ld QFN
ISL28407FVZ, 14 Ld TSSOP
ISL28407SOICEVAL1Z
Parts were never released and were marked as Coming Soon
Updated Package Outline Drawing M8.118B on page 29. Correct lead dimension in side view 2 from 0.15 - 0.05mm
to 0.15±0.05mm.
February 21, 2012 FN6631.6 Added dual and quad to the “SPICE NET LIST” on page 22.
Updated “Package Outline Drawing” on page 30. Added Thin to Package Title.
October 14, 2011
FN6631.5
Page 7: for ±15V and page 8 ±5V Elect Spec tables:
1. Ib for ISL28407 with Ta = -40C to 85C, change from +/-300pA to +/-330pA.
2. Ios for ISL28407 with Ta = -40C to 85C, change from +/-300pA to +/-330pA
3. TCIb/TCIos for 28407 with Ta = -40C to 70C, change the typical from 0.03 pA/C to 0.3 pA/C.
4. Spec limits for TCIb and TCIos for 0C to 70C: please change it from +/-1.4pA/C to +/-1.5pA/C and change test
condition from "-40C to 70C" to "0C to 70C".
For ISL28407 specs, change all "-40C to 70C" to "0C to 70C"
5. Spec limits for TCIb and TCIos for -40C to 85C: please change it from +/-1.8pA/C to +/-2.0pA/C
6. Voh @ Rl = 10kohm and 2kohm, please add "-40C to 70C under "test condition" and bold min. spec "13.2V and
13.1V"
7. Vol @ Rl = 10kohm and 2kohm, please add "-40C to 70C under "test condition" to max. spec. "-13.2V and -13.1V"
ESD Levels for ISL28407FBZ SOIC package
HBM: 6kV, MM: 450V, CDM: 2kV
• Pg 1 Description:
- Last paragraph - changed "ISL28407 will be available" to "ISL28407 is available"
• Pg 4 Ordering Information
- Removed Coming Soon from ISL28407FBZ
• Pg 6 Thermal Information:
- 8 Ld TDFN (ISL28107) ThetaJA changed from 48 to 44
- 8 Ld TDFN (ISL28107) ThetaJC changed from 7 to 3
±15V Electrical Specifications table
- Added ISL28407 VOS spec limits
- Added ISL28407 TCVOS spec limits
• Pg 7 ±15V Electrical Specifications table
- Added ISL28407 IB spec limits
- Added ISL28407 TCIB spec limits
- Added ISL28407 IOS spec limits
- Added ISL28407 TCIOS spec limits
- Converted AOL specs and limits from 3,000 V/mV and 40,000V/mV to 130dB and 152dB respectively
• Pg 8 ±5V Electrical Specifications table
- Added ISL28407 VOS spec limits
• Pg 9 ±5V Electrical Specifications table
- Added ISL28407 TCVOS spec limits
- Added ISL28407 IB spec limits
- Added ISL28407 TCIB spec limits
- Added ISL28407 IOS spec limits
- Added ISL28407 TCIOS spec limits
- Converted AOL specs and limits from 3,000 V/mV and 40,000V/mV to 130 dB and 152 dB respectively
• Pg 19 - Applications section "Using one Channel"
- Changed title to "unused channels" and added text edits for clarity.
Submit Document Feedback ₂₅
FN6631.8
September 29, 2015