ISL28118_1109 Datasheet, PDF (25/28 Pages) Intersil Corporation – 40V Precision Single-Supply, Rail-to-Rail Output, Low-Power Operational Amplifiers

ISL28118, ISL28218
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
REVISION
CHANGE
8/31/2011
FN7532.3
Page 7: Electrical Spec Table for Supply Current/Amplifier
Change from: 1.4µA Full Temp Max
Change to: 1.4mA Full Temp Max
Page 28: Updated POD M8.118 to current revision. Corrected lead width dimension in side view 1 from "0.25 -
0.036" to "0.25 - 0.36".
5/9/2011
FN7532.2
Page 2: Added NC pin to Pin Descriptions table.
Page 3: Added ISL28218EVAL1Z evaluation board to the Ordering Information table.
Page 12: Added new Output Overhead Voltage plots (Figs. 31,32)
Pages 19 through 24: Added SPICE model schematic, netlist, description and Figs. 66 through 80.
11/12/10
FN7532.1
On page 1: Features Section, added Low input offset voltage and superb offset voltage temperature drift for
ISL28118.
Updated Intersil trademark statement (bottom of page)
On page 3: Removed “coming soon” from ISL28118FBZ. Updated tape & reel note.
On page 4: Change ISL28118 Theta JA value from 158 to 165. Added ISL28118 min/max specs to VOS (input
offset voltage), TCVOS and min specs to CMRR.
On page 5: Added AVOL MIN spec for ISL28118 in dB. Changed existing AVOL spec from V/mV to dB. Added VOL
max spec for ISL28118, IS Typ and Max spec for ISL28118. Changed TS from 18µs to 8.5µs.
On page 6: Added Min Max VOS spec, TCVOS spec for ISL28118. Changed AVOL specs from V/mV to dB.
On page 7: Changed Slew Rate TYP from ±1.2V/µs to ±1V/µs. Added for TS TYP spec = 4µs. Changed min/max
note 8 to “Compliance to datasheet limits is assured by one or more methods: production test, characterization
and/or design.” Added Figs 3 & 4 for ISL28118. Figures 5 & 6 moved to page 8.
On page 8: Added Figures 7 & 8
On page 10: Added Figures 15 & 16 for ISL28118
On page 10, in Figure 19, changed VS from ±5V to ±15V
On page 12 and page 13: Added Figures 27, 28, 31 & 34 for ISL28118
On page 13: Added Figure 35 for ISL28118
On page 14: Figure 41 changed VS from ±18V to ±5V, Figure 42 added RL = 2k, Figure 43 added RL = 10k and
corrected "HD+N" to "THD+N"
On page 15, Figure 44 added RL = 2k, Figure 45 RL = 10k.
On page 17: Added Figure 58 for ISL28118
On page 17, Figure 58 and 59, graph upper left corner changed VS = ±5V to VS = ±15V
On page 17, Figure 61, deleted VS = ±5V
9/16/10
FN7532.0 Initial Release
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a
complete list of Intersil product families.
*For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page
on intersil.com: ISL28118, ISL28218.
To report errors or suggestions for this datasheet, please go to: www.intersil.com/askourstaff
FITs are available from our website at: http://rel.intersil.com/reports/search.php
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
25
FN7532.3
September 21, 2011