ISL28117_10 Datasheet, PDF (22/25 Pages) Intersil Corporation – 40V Precision Low Power Operational Amplifiers

ISL28117, ISL28217
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to
web to make sure you have the latest Rev.
DATE
REVISION
CHANGE
3/18/10
FN6632.4
1. Updated “Ordering Information” on page 2 by adding two rows for MSOP packages
ISL28117FUBZ and ISL28117FUZ, which are scheduled to release Q2 2010. Added Pinout
accordingly.
2. Added POD for MSOP M8.118 to the end of datasheet
3. In “Ordering Information” on page 2, Separated each part number with it's own specific -
T7 and -T13 suffix and removed “Add “-T7” or “-T13” suffix for Tape and Reel.” from Note 1.
4. Updated ±15 and ±5V Electrical Specification table with the following edits:
A) Separated VOS specs for SOIC and MSOP Grade C packages. Added new VOS specs
for MSOP Grade C package.
B) Separated TCVOS specs for SOIC and MSOP Grade C packages. Added new TCVOS
specs for MSOP Grade C package.
5. Added “Thermal Information” on page 4 for ISL28117 MSOP package.
3/3/10
Added “Related Literature*(see page 23)” on page 1.
Added Evaluation Boards to “Ordering Information” on page 2.
Added Theta JC values to “Thermal Information” on page 4. Added applicable Theta JC Note 5.
Updated Theta JA for ISL28217 8 Ld SOIC from 115°C/W to 105°C/W.
1/21/10
Part marking in “Ordering Information” on page 2 changed as follows:
ISL28117FBBZ changed from "28117 FBZ -B" to "28117 FBZ"
ISL28117FBZ changed from "28117 FBZ" to "28117 FBZ -C"
ISL28217FBBZ changed from "28217 FBZ -B" to "28217 FBZ"
ISL28217FBZ changed from "28217 FBZ" to "28217 FBZ -C"
12/24/09
11/25/09
On page 7: Changed label in Figure 1 from “V_S = +5V” to “V_S = ±5V”
On page 7: Changed label in Figure 2 from “V_S = +15V” to “V_S = ±15V”
Changed Typical VOS spec from “13” to “8” (B Grade), “19” to “4” (C Grade), IB from “0.18”
to “0.08, IOS from “0.3” to “0.08”. Edited Spice Schematic - L1 from “95.4957” to “15.9159E”,
R1 from “6k” to 1, R9 from “1” to “2.1E3”, R10 from “1” to “2.1E3, R12 from “6k” to “1”, L2
from “95.4957” to “15.9159E”. Edited Spice Net List - Changed Revision from “A” to “B”, Date
change from “October 29th 2009” to “November 20th 2009”, added after AOL “SR =
0.5V/µsec, Input Stage changed in I_IOS from “0.3E-9” to 0.08E-9”, V_VOS “13e-6” to
“8e-6”, Mid supply Ref R_R9 and R_R10 changed “1” to “2.1E3”, Common Mode Gain Stage
with Zero change in G_G5 and G_G6 “5.27046e-15” to “3.162277”, R_R11 and R_R12 “6.3”
to “1”, L_L1 and L_L2 “95.4957” to “15.9159E-3”
11/12/09
FN6632.3
Updated Typical Performance Curves Figure 5, 7, 9, 11, 13, 15, 17 and 19. Added Spice Model
and license statement. Replaced typical application schematic on page 1.
10/16/09
FN6632.2
On page 2 “Ordering Information”, changed the following:
a) corrected part marking for ISL28117FBBZ from "28117 -B FBZ" to "28117 FBZ -B".
Corrected part marking for ISL28217FBBZ from "28217-B FBZ" to "28217 FBZ -B"
B) Updated package outline drawing to most recent revision (no changes were made to
package dimensions; land pattern was added and dimensions were moved from table onto
drawing)
c) Added "Add “-T7” or “-T13” suffix for tape and reel." to the tape and reel Note 1.
d) added Note 3 callout to all parts (Note 3 reads: "For Moisture Sensitivity Level (MSL), please
see device information page for ISL28117, ISL28217. For more information on MSL please see
techbrief TB363.")
e) removed "Coming Soon" from ISL28117FBBZ, ISL28117FBZ & ISL28217FBBZ devices
22
April 13, 2010
FN6632.4