English
Language : 

ISL28006_14 Datasheet, PDF (22/26 Pages) Intersil Corporation – Micropower, Rail to Rail Input Current Sense Amplifier with Voltage Output
ISL28006
I = 2.86µA
(1mΩ
RS TO
0.1Ω)
CM
+ 0.1VDC
TO
-
28VDC
RS+
CD
RS-
RP
LOAD
gmHI
1.35V
gmLO
VCC
+
-
GND
2.7VDC
TO
28VDC
FIXED GAIN
OPTION
ONLY
OUT
FB
ADJ
OPTION
ONLY
FIGURE 80. TYPICAL APPLICATION CIRCUIT
Overall Accuracy (VOA %)
VOA is defined as the total output accuracy Referred-to-Output
(RTO). The output accuracy contains all offset and gain errors, at
a single output voltage. Equation 4 is used to calculate the %
total output accuracy.
VOA
=
100
×
⎛
⎜
⎝
V----O----U---T---a----c--V-t--O-u---Ua---T-l---e–---x--V-p--O-e---U-c--T-t---ee---xd---p---e----c---t---e---d--⎠⎟⎞
(EQ. 4)
where
VOUT Actual = VSENSE x GAIN
Example: Gain = 100, For 100mV VSENSE input we measure
10.1V. The overall accuracy (VOA) is 1% as shown in Equation 5.
VOA
=
100
×
⎛
⎝
-1---0----.-1-1---0-–-----1---0--⎠⎞
=
1%
(EQ. 5)
Power Dissipation
It is possible to exceed the +150°C maximum junction
temperatures under certain load and power supply conditions. It
is therefore important to calculate the maximum junction
temperature (TJMAX) for all applications to determine if power
supply voltages, load conditions, or package type need to be
modified to remain in the safe operating area. These parameters
are related using Equation 6:
TJMAX = TMAX + θJAxPDMAXTOTAL
(EQ. 6)
where:
• PDMAXTOTAL is the sum of the maximum power dissipation of
each amplifier in the package (PDMAX)
• PDMAX for each amplifier can be calculated using Equation 7:
PDMAX
=
VS × IqMAX + (VS
-
VOUTMAX
)
×
V----O----U---T---M-----A---X--
RL
(EQ. 7)
where:
• TMAX = Maximum ambient temperature
• θJA = Thermal resistance of the package
• PDMAX = Maximum power dissipation of 1 amplifier
• VCC = Total supply voltage
• IqMAX = Maximum quiescent supply current of 1 amplifier
• VOUTMAX = Maximum output voltage swing of the application
• RL = Load resistance
22
FN6548.6
November 22, 2013