ISL28006 Datasheet, PDF (22/25 Pages) Intersil Corporation – Micropower, Rail to Rail Input Current Sense Amplifier with Voltage Output

ISL28006
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web
to make sure you have the latest Rev.
DATE REVISION
CHANGE
5/12/10 FN6548.3 Added Note 4 to Part Marking Column in “Ordering Information” on page 3.
Corrected hyperlinks in Notes 1 and 3 in “Ordering Information” on page 3.
4/8/10
Removed “Coming Soon” from evaluation boards in “Ordering Information” on page 3.
4/7/10
Added “Related Literature*(see page 23)” on page 1
Updated Package Drawing Number in the “Ordering Information” on page 3 for the 20V, 50V and 100V
options from MDP0038 to P50.64A.
Revised package outline drawing from MDP0038 to P5.064A on page 24. MDP0038 package contained 2
packages for both the 5 and 6 Ld SOT-23. MDP0038 was obsoleted and the packages were separated and
made into 2 separate package outline drawings; P5.064A and P6.064A. Changes to the 5 Ld SOT-23 were
to move dimensions from table onto drawing, add land pattern and add JEDEC reference number.
3/10/10
FN6548.2
Releasing adjustable gain option.
Added adjustable block diagram (Page 2), Added adjustable gain limits to electrical spec table, added
Figures 47 through 60, Added +85°C curves to Figures 6 thru 14, 20 thru 28, 34 thru 42, and Figures 48
thru 56. Modified Figure 70.
2/4/10
FN6548.1
-Page 1:
Edited last sentence of paragraph 2.
Moved order of GAIN listings from 20, 50, 100 to 100, 50, 20 in the 3rd paragraph.
Under Features ....removed "Low Input Offset Voltage 250µV, max"
Under Features .... moved order of parts listing from 20, 50, 100 (from top to bottom) to 100, 50, 20.
-Page 3:
Removed coming soon on ISL28006FH50Z and ISL28006FH20Z and changes the order or listing them to
100, 50, 20.
-Page 5:
VOA test. Under conditions column ...deleted 20mV to. It now reads ... Vsense = 100mV
SR test. Under conditions column ..deleted what was there. It now reads ... Pulse on RS+pin, See Figure 51
-Page 6:
ts test. Removed Gain = 100 and Gain = 100V/V in both description and conditions columns respectively.
-Page 9:
Added VRS+= 12V to Figures 16, 17, 18.
-Page 11:
Added VRS+= 12V to Figures 30, 31, 32.
-Page 13 & 14:
Added VRS+= 12V to Figures 44, 45, 46.
-Page 14
Added Figure 51 and adjusted figure numbers to account for the added figure.
-Figs 8, 26, and 40 change "HIGH SIDE" to "VRS = 12V", where RS is subscript.
-Figs 9, 27, and 41 change "LOW SIDE" to "VRS = 0.1V", where RS is subscript.
12/14/09 FN6548.0 Initial Release
22
FN6548.3
May 27, 2010