ISL26320 Datasheet, PDF (22/23 Pages) Intersil Corporation – 12-bit, 250kSPS Low-power ADCs with Single-ended and Differential Inputs and Multiple Input Channels

ISL26320, ISL26321, ISL26322, ISL26323, ISL26324, ISL26325, ISL26329
Package Outline Drawing
M16.173
16 LEAD THIN SHRINK SMALL OUTLINE PACKAGE (TSSOP)
Rev 2, 5/10
A
13
5.00 ±0.10
16
9
SEE DETAIL "X"
6.40
4.40 ±0.10
2
3
PIN #1
I.D. MARK
0.20 C B A 1
8
0.65
B
TOP VIEW
0.09-0.20
END VIEW
H
C
SEATING
PLANE
0.10 C
- 0.05
1.20 MAX
0.90 +0.15/-0.10
0.25 +0.05/-0.06 ₅
0.10 M C B A
SIDE VIEW
0.05 MIN
0.15 MAX
1.00 REF
GAUGE
PLANE
0.25
DETAIL "X"
0°-8°
0.60 ±0.15
(5.65)
(1.45)
(0.65 TYP)
(0.35 TYP)
TYPICAL RECOMMENDED LAND PATTERN
NOTES:
1. Dimension does not include mold flash, protrusions or gate burrs.
Mold flash, protrusions or gate burrs shall not exceed 0.15 per side.
2. Dimension does not include interlead flash or protrusion. Interlead
flash or protrusion shall not exceed 0.25 per side.
3. Dimensions are measured at datum plane H.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
5. Dimension does not include dambar protrusion. Allowable protrusion
shall be 0.08mm total in excess of dimension at maximum material
condition. Minimum space between protrusion and adjacent lead
is 0.07mm.
6. Dimension in ( ) are for reference only.
7. Conforms to JEDEC MO-153.
22
FN8273.0
June 8, 2012