ISL32450E Datasheet, PDF (21/21 Pages) Intersil Corporation – ±60V Fault Protected, 3.3V to 5V, ±20V Common Mode Range, RS-485/RS-422 Transceivers with Cable Invert and ±15kV ESD

ISL32450E, ISL32452E, ISL32453E, ISL32455E, ISL32457E
Package Outline Drawing
M14.15
14 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
Rev 1, 10/09
4
8.65
0.10 C A-B 2X
A3 ₆
14
8
D
DETAIL"A"
0.22±0.03
3.9
4
0.10 C D 2X
PIN NO.1
ID MARK
5
7
0.31-0.51
0.25M C A-B D
B3 6
TOP VIEW
6.0
0.20 C 2X
(0.35) x 45°
4° ± 4°
1.75 MAX
1.27
0.10-0.25
SIDE VIEW
1.25 MIN
0.10 C
H
DETAIL "A"
0.25
GAUGE PLANE _C
SEATING PLANE
0.10 C
(1.27)
(0.6)
(5.40)
TYPICAL RECOMMENDED LAND PATTERN
(1.50)
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to AMSEY14.5m-1994.
3. Datums A and B to be determined at Datum H.
4. Dimension does not include interlead flash or protrusions.
Interlead flash or protrusions shall not exceed 0.25mm per side.
5. The pin #1 indentifier may be either a mold or mark feature.
6. Does not include dambar protrusion. Allowable dambar protrusion
shall be 0.10mm total in excess of lead width at maximum condition.
7. Reference to JEDEC MS-012-AB.
21
FN7921.0
February 20, 2012