X9116_06 Datasheet, PDF (2/9 Pages) Intersil Corporation – Digitally Controlled Potentiometer

X9116
Ordering Information
PART NUMBER
(BRAND)
X9116WM8T1
X9116WM8ZT1 (Note)
V_CC LIMITS
PART MARKING
(V)
AAZ
5V ±10%
AKY
X9116WM8I*
X9116WM8IZ* (Note)
X9116WS8*
X9116WS8Z* (Note)
X9116WS8I*
X9116WS8IZ* (Note)
X9116WM8-2.7**
X9116WM8Z-2.7* (Note)
AFL
DCG
X9116W
X9116W Z
X9116W I
X9116W ZI
AFK
AOJ
-2.7-5.5
R_TOTAL
(kΩ)
10
TEMP. RANGE
(°C)
PACKAGE
PKG.
DWG. #
0 to +70
8 Ld MSOP Tape and Reel M8.118
0 to +70
8 Ld MSOP (Pb-free)
Tape and Reel
M8.118
-40 to +85 8 Ld MSOP
M8.118
-40 to +85 8 Ld MSOP (Pb-free)
M8.118
0 to +70
8 Ld SOIC
M8.15
0 to +70
8 Ld SOIC (Pb-free)
M8.15
-40 to +85 8 Ld SOIC
M8.15
-40 to +85 8 Ld SOIC (Pb-free)
M8.15
0 to +70
8 Ld MSOP
M8.118
0 to +70
8 Ld MSOP (Pb-free)
M8.118
X9116WM8I-2.7*
ABA
-40 to +85 8 Ld MSOP
M8.118
X9116WM8IZ-2.7* (Note) AKS
-40 to +85 8 Ld MSOP (Pb-free)
M8.118
X9116WS8-2.7*
X9116W F
0 to +70
8 Ld SOIC
M8.15
X9116WS8Z-2.7* (Note) X9116W ZF
0 to +70
8 Ld SOIC (Pb-free)
M8.15
X9116WS8I-2.7*
X9116W G
-40 to +85 8 Ld SOIC
M8.15
X9116WS8IZ-2.7* (Note) X9116W ZG
-40 to +85 8 Ld SOIC (Pb-free)
M8.15
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and
100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
*Add "T1" suffix for tape and reel.
**Add “T2” suffix for tape and reel.
Pin Descriptions
V_H /R_H and V_L /R_L
The high (V_H/R_H) and low (V_L/R_L) terminals of the X9116
are equivalent to the fixed terminals of a mechanical
potentiometer. The minimum voltage is V_SS and the
maximum is V_CC.
V_W/R_W
R_w/R_w is the wiper terminal and is equivalent to the movable
terminal of a mechanical potentiometer. The position of the
wiper within the array is determined by the control inputs.
The wiper terminal series resistance is typically 200Ω to
400Ω depending upon V_CC.
Up/Down (U/D)
The U/D input controls the direction of the wiper movement
and whether the counter is incremented (up) or decremented
(down).
Increment (INC)
The INC input is negative-edge triggered. Toggling INC will
move the wiper and either increment or decrement the
counter in the direction indicated by the logic level on the
U/D input.
Chip Select (CS)
The device is selected when the CS input is LOW. The
current counter value is stored in nonvolatile memory when
CS is returned HIGH while the INC input is also HIGH. After
the store operation is complete the X9116 will be placed in
the low power standby mode until the device is selected
once again.
Pin Descriptions
SYMBOL
VH/RH
VW/RW
VL/RL
VSS
VCC
U/D
INC
CS
DESCRIPTION
High Terminal
Wiper Terminal
Low Terminal
Ground
Supply Voltage
Up/Down Control Input
Increment Control Input
Chip Select Input
2
FN8160.2
September 26, 2006