RHRP6120CC Datasheet, PDF (2/5 Pages) Intersil Corporation – 6A, 1200V Hyperfast Dual Diode

RHRP6120CC
Absolute Maximum Ratings (Per Leg) T_C = +25^oC, Unless Otherwise Specified
RHRP6120CC
UNITS
Peak Repetitive Reverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_RRM
1200
V
Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_RWM
1200
V
DC Blocking Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_R
1200
V
Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I_F(AV)
6
A
T_C = 130^oC
Repetitive Peak Surge Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I_FSM
12
A
Square Wave, 20kHz
Nonrepetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I_FSM
60
A
Halfwave, 1 Phase, 60Hz
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P_D
50
W
Avalanche Energy (See Figures 10 and 11). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E_AVL
10
mJ
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T_STG,T_J
-65 to +175
o_C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Electrical Specifications (Per Leg) T_C = +25^oC, Unless Otherwise Specified
SYMBOL
TEST CONDITION
MIN
TYP
MAX
UNITS
V_F
I_F = 6A, T_C = +25^oC
I_F = 6A, T_C = +150^oC
I_R
V_R = 1200V, T_C = +25^oC
V_R = 1200V, T_C = +150^oC
-
-
3.2
V
-
-
2.6
V
-
-
100
µA
-
-
500
µA
t_RR
I_F = 1A, dI_F/dt = 200A/µs
-
-
55
ns
I_F = 6A, dI_F/dt = 200A/µs
-
-
65
ns
t_A
I_F = 6A, dI_F/dt = 200A/µs
-
33
-
ns
t_B
I_F = 6A, dI_F/dt = 200A/µs
-
22
-
ns
Q_RR
I_F = 6A, dI_F/dt = 200A/µs
-
210
-
nC
C_J
R_θJC
V_R = 10V, I_F = 0A
-
22
-
pF
-
-
3
o_C/W
DEFINITIONS
V_F = Instantaneous forward voltage (pw = 300µs, D = 2%).
I_R = Instantaneous reverse current.
t_RR = Reverse recovery time (See Figure 9), summation of t_A + t_B.
t_A = Time to reach peak reverse current (See Figure 9).
t_B = Time from peak I_RM to projected zero crossing of I_RM based on a straight line from peak I_RM through 25% of I_RM (See Figure 9).
Q_RR = Reverse recovery charge.
C_J = Junction Capacitance.
R_θJC = Thermal resistance junction to case.
E_AVL = Controlled Avalanche Energy (See Figures 10 and 11).
pw = pulse width.
D = duty cycle.
2