ISL76683 Datasheet, PDF (2/17 Pages) Intersil Corporation – Light-to-Digital Output Sensor with Gain Selection, Interrupt Function

Pin Configuration
ISL76683
ISL76683
(6 LD ODFN)
TOP VIEW
VDD 1
GND 2
REXT 3
THERMAL
PAD
6 SDA
5 SCL
4 INT
Pin Descriptions
PIN NUMBER
1
2
3
4
5
6
PIN NAME
VDD
GND
REXT
INT
SCL
SDA
DESCRIPTION
Positive supply; connect this pin to a regulated 2.5V to 3.3V supply
Ground pin. The thermal pad is connected to the GND pin
External resistor pin for ADC reference; connect this pin to ground through a (nominal) 100kΩ resistor
Interrupt pin; LO for interrupt/alarming. The INT pin is an open drain.
I²C serial clock
The I²C bus lines can be pulled above VDD, 5.5V max.
I²C serial data
Ordering Information
PART NUMBER
(Notes 1, 2, 3)
TEMP RANGE
(°C)
PACKAGE
(Pb-free)
PKG. DWG. #
ISL76683AROZ-T7
-40 to +105
6 Ld ODFN
L6.2x2.1
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu plate - e4
termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified
at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL76683. For more information on MSL please see techbrief TB363.
2
FN7697.1
January 31, 2011