English
Language : 

ISL59112_07 Datasheet, PDF (2/8 Pages) Intersil Corporation – 40MHz Rail-to-Rail Video Buffer
ISL59112
Absolute Maximum Ratings (TA = +25°C)
Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . . 3.6V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . VS+ +0.3V to VS- -0.3V
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .3000V
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .300V
Thermal Information
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are
at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications VS+ = 3.3V, VS- = GND, TA = +25°C, RL = 150Ω to GND, unless otherwise specified
DESCRIPTION
PARAMETER
CONDITIONS
MIN TYP
MAX
UNIT
INPUT CHARACTERISTICS
VCC
IDD(ON)
IDD(OFF)
VOLS
VCLAMP
ICLAMP
IB
RIN
AV
ASAG
PSRR
VOH
ISC
IENABLE
VIL
VIH
ROUT
Supply Voltage Range
Quiescent Supply Current
Shutdown Supply Current
Output Level Shift Voltage
Input Voltage Clamp
Clamp Current
Input Bias Current
Input Resistance
Voltage Gain
SAG Correction DC Gain to VOUT
DC Power Supply Rejection
Output Voltage High Swing
Output Short-Circuit Current
Enable Current
EN Logic Low Threshold
EN Logic High Threshold
Shutdown Output Impedance
2.5
3.6
V
VIN = 500mV, EN = VDD, no load
EN = 0V
2
2.75
mA
3
µA
VIN = 0V, no load
IIN = -1mA
VIN = VCLAMP - 100mV
VIN = 500mV
0.5V < VIN < 1.0V
RL = 150Ω
SAG open
60
130
200
mV
-40
-15
+10
mV
-6
-3
mA
2.5
5
7.5
µA
0.5
3
MΩ
5.8
6.0
6.2
dB
2.25
V/V
VDD = 2.7V to 3.3V
43
63
dB
VIN = 2V, RL = 150Ω to GND
2.85
3.2
V
VIN = 2V, to GND through 10Ω
-94
-65
mA
VIN = 100mV, out short to VDD through 10Ω 65
115
mA
Enable pin = 0V to 3.6V
-3
0
+3
µA
VDD = 2.7V to 3.3V
VDD = 2.7V to 3.3V
EN = 0V DC
0.8
V
1.6
V
3.6
4.5
5.9
kΩ
EN = 0V, f = 4.5MHz
3.4
kΩ
AC PERFORMANCE
BW
-3dB Bandwidth
BW
±0.1dB Bandwidth
dG
Differential Gain
RL = 150Ω, CL = 5pF
RL = 150Ω, CL = 5pF
NTSC and PAL DC coupled
40
MHz
27
MHz
0.02
%
NTSC and PAL AC coupled
0.02
%
dP
Differential Phase
NTSC and PAL DC coupled
0.4
°
NTSC and PAL AC coupled
0.04
°
D/DT
Group Delay Variation
f = 100kHz, 5MHz
5.4
ns
SNR
Signal To Noise Ratio
100% white signal
65
dB
tON
Enable Time
VIN = 500mV, VOUT to 1%
570
ns
2
FN6142.4
March 15, 2007