ISL55016 Datasheet, PDF (2/11 Pages) Intersil Corporation – MMIC Silicon Bipolar Differential Amplifier

ISL55016
Absolute Maximum Ratings (T_A = +25°C)
Supply Voltage from VSP to GND . . . . . . . . . . . . . . . . . . . . . . 5.75V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . V_S+ +0.3V to GND -0.3V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . . .3kV
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .300V
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
6 Ld TDFN Package. . . . . . . . . . . . . . . . . . . . . . . . .
125
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +135°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
Electrical Specifications VSP = +5V, Z_RSC = 50Ω single-ended connected to VINM, Z_LOAD = 100Ω differential across VOM and VOP,
VINP AC-grounded, T_A = +25°C, unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX UNIT
VSP
Supply Voltage
4.5
5.0
5.5
V
I_VSP
Operating Current
91
104
117
mA
Sds21_diff
Small Signal Gain, Differential
Ssd12_diff
Reverse Isolation, Differential
Sss11_SE
Input Return Loss, Single-Ended
Sdd22_diff
Output Return Loss, Differential
S21_SE
Gain of Pin VOP, Single-Ended
50MHz Z_RSC = 75Ω, Z_LOAD = 100Ω
1.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
2.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
50MHz Z_RSC = 75Ω, Z_LOAD = 100Ω
1.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
2.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
50MHz Z_RSC = 75Ω, Z_LOAD = 100Ω
1.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
2.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
50MHz Z_RSC = 75Ω, Z_LOAD = 100Ω
1.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
2.0GHz Z_RSC = 75Ω, Z_LOAD = 100Ω
50MHz
17.5
dB
17.1
dB
15.5
dB
28.4
dB
30.2
dB
36.3
dB
27.1
dB
15.1
dB
6.9
dB
17.4
dB
10.6
dB
5.6
dB
13.2 14.5 15.7
dB
1.0GHz
12.9 14.0 15.4
dB
2.0GHz
12.0 12.9 14.5
dB
S31_SE
Gain of Pin VOM, Single-Ended
50MHz
12.9 14.1 15.4
dB
1.0GHz
12.4 13.5 14.9
dB
2.0GHz
11.3 12.1 13.8
dB
P1dB_diff
Output Power at 1dB Compression Point, 50MHz, (Note 2)
Differential
1.0GHz, (Note 2)
15
17.2
19
dBm
13.9 15.8 17.9 dBm
2.0GHz, (Note 2)
10.4 12.0 14.4 dBm
OIP3_4_SE
Output Third Order Intercept Point at
VOP Pin, Single-Ended
f1 = 50MHz, f2 = 55MHz
f1 = 1.0GHz, f2 = 1.1GHz
22.7
22.1
27.5
24.2
32.7
29.1
dBm
dBm
f1 = 2.0GHz, f2 = 2.1GHz
16.2 18.1 22.2 dBm
OIP3_5_SE
Output Third Order Intercept Point at
VOM Pin, Single-Ended
f1 = 50MHz, f2 = 55MHz
f1 = 1.0GHz, f2 = 1.1GHz
22.6
21.9
26.6
23.6
32.6
27.9
dBm
dBm
f1 = 2.0GHz, f2 = 2.1GHz
14.9 17.3 21.4 dBm
2
FN6526.1
June 24, 2008