English
Language : 

ISL3282EMRTEP Datasheet, PDF (2/8 Pages) Intersil Corporation – RS-485/RS-422 Receiver
ISL3282EMRTEP
Ordering Information
PART NUMBER
(Notes 1, 2)
VENDOR ITEM DRAWING
PART MARKING
TEMP. RANGE
(°C)
PACKAGE
(Tape and Reel)
(Pb-Free)
ISL3282EMRTEP-T
V62/10601-01XB
282
-55 to +125
8 Ld TDFN
ISL3282EMRTEP-TK
V62/10601-01XB
282
-55 to +125
8 Ld TDFN
NOTES:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-
free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. Please refer to TB347 for details on reel specifications.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL3282EMRTEP. For more information on MSL please see techbrief
TB363.
Truth Table
RECEIVING
INPUTS
RE
A-B
0
≥ -0.05V
0
≤ -0.2V
0
Inputs Open/Shorted
1
X
OUTPUT
RO
1
0
1
High-Z*
Pin Configurations
ISL3282EMRTEP
(8 LD TDFN)
TOP VIEW
RO 1
GND 2
R
NC 3
VCC 4
8B
7 RE
6 VL
5A
Pin Descriptions
PIN NAME
FUNCTION
RO
Receiver output: If A - B ≥ -50mV, RO is high; If A - B ≤ -200mV, RO is low; RO = High if A and B are unconnected (floating) or shorted.
RE
Receiver output enable. RO is enabled when RE is low; RO is high impedance when RE is high. If the Rx enable function isn’t used, connect
RE directly to GND. RE is internally pulled high.
GND Ground connection. This is also the potential of the TDFN thermal pad.
A
±16.5kV IEC61000 ESD Protected RS-485, RS-422 level, noninverting receiver input.
B
±16.5kV IEC61000 ESD Protected RS-485, RS-422 level, inverting receiver input.
VCC
System power supply input (3.0V to 5.5V). On devices with a VL pin, power-up VCC first.
VL
Logic-Level Supply which sets the VIL/VIH levels for the RE pin, and sets the VOH level of the RO output. Power-up this supply after VCC, and
keep VL ≤ VCC.
NC
No Connection.
2
FN7595.1
February 15, 2011