English
Language : 

ISL29009 Datasheet, PDF (2/7 Pages) Intersil Corporation – Non-Linear Output Current, Low Power Ambient Light Photo Detect IC
◁
ISL29009
Absolute Maximum Ratings (TA = +25°C)
Supply Voltage between VDD and GND . . . . . . . . . . . . . . . . . . 3.6V
Pin Voltage (IOUT and EN) . . . . . . . . . . . . . . . . . . . . . -0.2V to VDD
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . . 6mA
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200V
Thermal Information
Thermal Resistance
θJA (°C/W)
6 Ld ODFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/data/tb/TB477.pdf
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications VDD = 3V, TA = +25°C, EN = 0, RL = 100kΩ at IOUT pin, green LED light, unless otherwise specified.
PARAMETER
DESCRIPTION
E
Range of Input Light Intensity
VDD
Power Supply Range
IDD
Supply Current
ISD
IOUT1
IOUT2
IDARK
ΔIOUT
VO-MAX
tR
Supply Current when Shut Down
Light-to-Current Accuracy
Light-to-Current Accuracy
Dark Current Output in the Absence of Light
Output Current Variation Over Three Light Sources:
Fluorescent, Incandescent and Halogen
IOUT Max Output Compliance Voltage at 95% of
Nominal Output
IOUT Rise Time (Note 1)
tF
IOUT Fall Time (Note 1)
tD
IOUT Delay Time for Rising Edge (Note 1)
tS
IOUT Delay Time for Falling Edge (Note 1)
VLO
Maximum Voltage at EN pin to Enable
VHI
Minimum Voltage at EN pin to Disable
ILO
Input Current at EN pin
IHI
Input Current at EN pin
CONDITION
E = 1000 lux
E = 100 lux
E = 0 lux
EN = VDD
E = 100 lux
E = 1000 lux
E = 0 lux, RL = 10MΩ
MIN
TYP
MAX UNIT
0.3 to 10k
lux
1.8
3.3
V
9
14
µA
3
µA
0.25
µA
250
350 nA
1.8
µA
4.6
5.7
6.8 µA
2
5
nA
10
%
E = 1000 lux
RL = 100kΩ, E = 300 lux
from 0 Lux
RL = 100kΩ, E = 1000 lux
from 0 Lux
RL = 100kΩ, E = 300 lux to
0 Lux
RL = 100kΩ, E = 1000 lux to
0 Lux
RL = 100kΩ, E = 300 lux
from 0 Lux
RL = 100kΩ, E = 1000 lux
from 0 Lux
RL = 100kΩ, E = 300 lux to
0 Lux
RL = 100kΩ, E = 1000 lux to
0 Lux
V EN = 0V
V EN = 3V
VDD - 0.2
V
70
µs
20
µs
2410
µs
1290
µs
600
µs
280
µs
75
µs
5
µs
0.5
V
VDD - 0.5
V
1
nA
1
nA
2
FN6484.0
July 1, 2008
 ▷