ISL24003 Datasheet, PDF (2/10 Pages) Intersil Corporation – Multi-Channel Buffers Plus VCOM Driver

ISL24003
Absolute Maximum Ratings (T_A = 25°C)
Supply Voltage between V_S+ and V_S- . . . . . . . . . . . . . . . . . . . .+18V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . V_S- -0.5V, V_S+ +0.5V
Maximum Continuous Output Current (V_OUT1-18) . . . . . . . . . 10mA
Maximum Continuous Output Current (V_OUTA). . . . . . . . . . . . 60mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
Electrical Specifications V_S+ = +15V, V_S- = 0, R_L = 10kΩ, C_L = 10pF to 0V, T_A = 25°C unless otherwise specified
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX UNIT
INPUT CHARACTERISTICS (REFERENCE BUFFERS)
V_OS
TCV_OS
I_B
R_IN
C_IN
A_V
CMIR
Input Offset Voltage
Average Offset Voltage Drift
Input Bias Current
Input Impedance
Input Capacitance
Voltage Gain
Input Voltage Range
V_CM = 0V
(Note 1)
V_CM = 0V
1V ≤ V_OUT ≤ 14V
IN1 to IN9
IN10 to IN18
2
20
mV
5
µV/°C
2
50
nA
10
MΩ
1.35
pF
0.992
1.008 V/V
1.5
V_S+
V
0
V_S+
V
-1.5
INPUT CHARACTERISTICS (V_COM BUFFER)
V_OS
Input Offset Voltage
TCV_OS
Average Offset Voltage Drift
I_B
Input Bias Current
R_IN
Input Impedance
C_IN
Input Capacitance
V_REG
Load Regulation
CMIR_COM
Input Voltage Range V_COM
A_VOL
Open Loop Gain
CMRR
Common Mode Rejection Ratio
V_CM = 7.5V
(Note 1)
V_CM = 7.5V
V_COM = 7.5V, -60mA < I_L < 60mA
R_L = 1kΩ
1
15
mV
3
µV/°C
2
50
nA
10
MΩ
1.35
pF
-25
+20
mV
0
V_S+
V
55
70
dB
50
65
dB
OUTPUT CHARACTERISTICS (REFERENCE BUFFERS)
V_OH
High Output Voltage - (Output 1-2)
High Output Voltage - (Output 3-9)
V_IN = 15V, I_O = 5mA
14.85 14.9
V
14.8 14.85
V
High Output Voltage - (Output 10-18)
V_IN = 13.5V, I_O = 5mA
V_OL
Low Output Voltage - (Output 1-9)
V_IN = 1.5V, I_O = 5mA
Low Output Voltage - (Output 10-16)
V_IN = 0V, I_O = 5mA
Low Output Voltage - (Output 17-18)
13.45 13.5
1.5
1.55
V
150
200
mV
100
150
mV
I_SC
Short Circuit Current
OUTPUT CHARACTERISTICS (V_COM BUFFER)
V_OH
High Level Saturated Output Voltage
V_OL
Low Level Saturated Output Voltage
I_SC
Short Circuit Current
V_S+ = 15V, I_O = -5mA, V_I = 15V
V_S+ = 15V, I_O = -5mA, V_I = 0V
100
130
mA
14.85 14.9
V
0.1
0.15
V
150
180
mA
2
FN6118.0
December 7, 2005