 English |
|
|
|
|
|
|
|
| HIN202 Datasheet, PDF (2/18 Pages) Intersil Corporation – +5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors | |||
| |||
| ◁ |
HIN202, HIN206, HIN207, HIN208, HIN211, HIN213
Ordering Information
PART NO.
HIN202CB
HIN202CB-T
HIN202CBN
HIN202CBN-T
HIN202CP
HIN202IB
TEMP.
RANGE (oC)
PACKAGE
0 to 70 16 Ld SOIC (W)
0 to 70
16 Ld SOIC (W)
Tape and Reel
0 to 70 16 Ld SOIC (N)
0 to 70
16 Ld SOIC (N)
Tape and Reel
0 to 70 16 Ld PDIP
-40 to 85 16 Ld SOIC (W)
HIN202IBN
HIN206CB
HIN207CA
HIN207CB
-40 to 85
0 to 70
0 to 70
0 to 70
16 Ld SOIC (N)
24 Ld SOIC
24 Ld SSOP
24 Ld SOIC
PKG.
DWG. #
M16.3
M16.3
M16.15
M16.15
E16.3
M16.3
M16.15
M24.3
M24.209
M24.3
Ordering Information (Continued)
PART NO.
TEMP.
RANGE (oC)
PACKAGE
HIN207CB-T
0 to 70
24 Ld SOIC
Tape and Reel
HIN208CB
0 to 70 24 Ld SOIC
HIN208CB-T
0 to 70
24 Ld SOIC
Tape and Reel
HIN211CA
0 to 70 28 Ld SSOP
HIN211CA-T
0 to 70
28 Ld SSOP
Tape and Reel
HIN211CB
0 to 70 28 Ld SOIC
HIN211CB-T
0 to 70
28 Ld SOIC
Tape and Reel
HIN213CA
0 to 70 28 Ld SSOP
HIN213CA-T
0 to 70
28 Ld SSOP
Tape and Reel
PKG.
DWG. #
M24.3
M24.3
M24.3
M28.209
M28.209
M28.3
M28.3
M28.209
M28.209
Pin Descriptions
PIN
VCC
V+
V-
GND
Power Supply Input 5V ±10%, (5V ±5% HIN207).
Internally generated positive supply (+10V nominal).
Internally generated negative supply (-10V nominal).
Ground Lead. Connect to 0V.
FUNCTION
C1+
C1-
C2+
C2-
TIN
TOUT
RIN
ROUT
EN, EN
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400k⦠pull-up resistor to VCC is connected to each lead.
Transmitter Outputs. These are RS-232 levels (nominally ±10V).
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5k⦠pull-down resistor to GND is connected to each input.
Receiver Outputs. These are TTL/CMOS levels.
Receiver enable Input. With EN = 5V (HIN213 EN = 0V), the receiver outputs are placed in a high impedance state.
SD, SD
NC
Shutdown Input. With SD = 5V (HIN213 SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance state
(except R4 and R5 of HIN213) and the transmitters are shut off.
No Connect. No connections are made to these leads.
2
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese