English
Language : 

HFA1105_06 Datasheet, PDF (2/12 Pages) Intersil Corporation – 330MHz, Low Power, Current Feedback Video Operational Amplifier
HFA1105
Absolute Maximum Ratings
Supply Voltage (V+ to V-). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11V
DC Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSUPPLY
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8V
Output Current (Note 3) . . . . . . . . . . . . . . . . . Short Circuit Protected
30mA Continuous
60mA ≤ 50% Duty Cycle
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>600V
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to 85°C
Thermal Information
Thermal Resistance (Typical, Note 4)
θJA (°C/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
165
Maximum Junction Temperature (Die) . . . . . . . . . . . . . . . . . . . . 175°C
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300°C
(Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
3. Output is short circuit protected to ground. Brief short circuits to ground will not degrade reliability, however continuous (100% duty cycle) output
current must not exceed 30mA for maximum reliability.
4. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications VSUPPLY = ±5V, AV = +1, RF = 510W, RL = 100W, Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
(NOTE 5)
TEST
LEVEL
TEMP.
(°C)
MIN TYP MAX UNITS
INPUT CHARACTERISTICS
Input Offset Voltage
A
25
-
2
5
mV
A
Full
-
3
8
mV
Average Input Offset Voltage Drift
B
Full
-
1
10
µV/°C
Input Offset Voltage
Common-Mode Rejection Ratio
Input Offset Voltage
Power Supply Rejection Ratio
Non-Inverting Input Bias Current
∆VCM = ±1.8V
∆VCM = ±1.8V
∆VCM = ±1.2V
∆VPS = ±1.8V
∆VPS = ±1.8V
∆VPS = ±1.2V
A
25
47
50
-
dB
A
85
45
48
-
dB
A
-40
45
48
-
dB
A
25
50
54
-
dB
A
85
47
50
-
dB
A
-40
47
50
-
dB
A
25
-
6
15
µA
A
Full
-
10
25
µA
Non-Inverting Input Bias Current Drift
B
Full
-
5
60
nA/°C
Non-Inverting Input Bias Current
Power Supply Sensitivity
Non-Inverting Input Resistance
Inverting Input Bias Current
∆VPS = ±1.8V
∆VPS = ±1.8V
∆VPS = ±1.2V
∆VCM = ±1.8V
∆VCM = ±1.8V
∆VCM = ±1.2V
A
25
-
0.5
1
µA/V
A
85
-
0.8
3
µA/V
A
-40
-
0.8
3
µA/V
A
25
0.8 1.2
-
MΩ
A
85
0.5 0.8
-
MΩ
A
-40
0.5 0.8
-
MΩ
A
25
-
2
7.5
µA
A
Full
-
5
15
µA
Inverting Input Bias Current Drift
B
Full
-
60 200 nA/°C
Inverting Input Bias Current
Common-Mode Sensitivity
Inverting Input Bias Current
Power Supply Sensitivity
∆VCM = ±1.8V
∆VCM = ±1.8V
∆VCM = ±1.2V
∆VPS = ±1.8V
∆VPS = ±1.8V
∆VPS = ±1.2V
A
25
-
3
6
µA/V
A
85
-
4
8
µA/V
A
-40
-
4
8
µA/V
A
25
-
2
5
µA/V
A
85
-
4
8
µA/V
A
-40
-
4
8
µA/V
2
FN3395.8
June 6, 2006