HA4314B Datasheet, PDF (2/10 Pages) Intersil Corporation – 400MHz, 4 x 1 Video Crosspoint Switch

HA4314B
Absolute Maximum Ratings
Voltage Between V+ and V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V_SUPPLY
Digital Input Current (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . ±25mA
Analog Input Current (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . ±5mA
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . .2000V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 70^oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (^oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120
SSOP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .
140
Maximum Junction Temperature (Die) . . . . . . . . . . . . . . . . . . . 175^oC
Maximum Junction Temperature (Plastic Package) . . . . . . . 150^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300^oC
(SOIC and SSOP - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θ_JA is measured with the component mounted on an evaluation PC board in free air.
2. If an input signal is applied before the supplies are powered up, the input current must be limited to these maximum values.
Electrical Specifications V_SUPPLY = ±5V, R_L = 10kΩ, V_CS = 0.8V, Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
(NOTE 4)
TEMP. (^oC)
MIN
DC SUPPLY CHARACTERISTICS
Supply Voltage
Full
±4.5
Supply Current (V_OUT = 0V)
ANALOG DC CHARACTERISTICS
V_CS = 0.8V
V_CS = 0.8V
V_CS = 2.0V
V_CS = 2.0V
25, 70
-
0
-
25, 70
-
0
-
Output Voltage Swing without Clipping
V_OUT = V_IN ± V_IO ± 20mV
25, 70
±2.7
0
±2.4
Output Current
Full
15
Input Bias Current
Full
-
Output Offset Voltage
Full
-10
Output Offset Voltage Drift (Note 3)
Full
-
SWITCHING CHARACTERISTICS
Turn-On Time
25
-
Turn-Off Time
25
-
Output Glitch During Switching
25
-
DIGITAL DC CHARACTERISTICS
Input Logic High Voltage
Full
2
Input Logic Low Voltage
Full
-
Input Current
0V to 4V
Full
-2
AC CHARACTERISTICS
Insertion Loss
1V_P-P
25
-
Full
-
Channel-to-Channel Insertion Loss Match
Full
-
-3dB Bandwidth
R_S = 50Ω, C_L = 10pF
R_S = 20Ω, C_L = 20pF
R_S = 16Ω, C_L = 36pF
R_S = 13Ω, C_L = 49pF
25
-
25
-
25
-
25
-
TYP
±5.0
10.5
-
400
400
±2.8
±2.5
20
30
-
25
160
320
±10
-
-
-
0.055
0.07
±0.004
400
280
140
110
MAX
UNITS
±5.5
V
13
mA
15.5
mA
450
µA
580
µA
-
V
-
V
-
mA
50
µA
10
mV
50
µV/^oC
-
ns
-
ns
-
mV
-
V
0.8
V
2
µA
0.063
0.08
±0.006
-
-
-
-
dB
dB
dB
MHz
MHz
MHz
MHz
2