HA-5320 Datasheet, PDF (2/7 Pages) Intersil Corporation – 1 Microsecond Precision Sample and Hold Amplifier

HA-5320
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24V
Digital Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +8V, -15V
Output Current, Continuous (Note 1) . . . . . . . . . . . . . . . . . . . ±20mA
Operating Conditions
Temperature Range
HA-5320-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55^oC to 125^oC
HA-5320-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 75^oC
HA-5320-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40^oC to 85^oC
Supply Voltage Range (Typical, Note 2) . . . . . . . . . ±13.5V to ±20V
Thermal Information
Thermal Resistance (Typical, Note 3)
θ_JA (^oC/W) θ_JC (^oC/W)
CERDIP Package. . . . . . . . . . . . . . . . .
70
18
PDIP Package . . . . . . . . . . . . . . . . . . .
75
N/A
SOIC Package . . . . . . . . . . . . . . . . . . .
90
N/A
Maximum Junction Temperature (Ceramic Package) . . . . . . . . .175^oC
Maximum Junction Temperature (Plastic Package) . . . . . . . .150^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300^oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Internal Power Dissipation may limit Output Current below 20mA.
2. Specification based on a one time characterization. This parameter is not guaranteed.
3. θ_JA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications V_SUPPLY = ±5.0V; C_H = Internal; Digital Input: V_IL = +0.8V (Sample), V_IH = +2.0V (Hold),
Unity Gain Configuration (Output tied to -Input), Unless Otherwise Specified
PARAMETER
TEST
CONDITIONS
TEMP.
(^oC)
HA-5320-2/-9
MIN TYP MAX
HA-5320-5
MIN TYP MAX
INPUT CHARACTERISTICS
Input Voltage Range
Full
±10
-
-
±10
-
-
Input Resistance
25
1
5
-
1
5
-
Input Capacitance
25
-
-
5
-
-
5
Offset Voltage
25
-
0.2
-
-
0.5
-
Full
-
-
2.0
-
-
1.5
Bias Current
25
-
70
200
-
100
300
Full
-
-
200
-
-
300
Offset Current
25
-
30
100
-
30
300
Full
-
-
100
-
-
300
Common Mode Range
Full
±10
-
-
±10
-
-
CMRR
Offset Voltage Temperature Coefficient
V_CM = ±5V
25
80
90
-
72
90
-
Full
-
5
15
-
5
20
TRANSFER CHARACTERISTICS
Gain
DC, (Note 12)
25
10⁶ 2 x 10⁶
-
3 x 10⁵ 2 x 10⁶
-
Gain Bandwidth Product
(A_V = +1, Note 5)
OUTPUT CHARACTERISTICS
C_H = 100pF
C_H = 1000pF
25
-
2.0
-
25
-
0.18
-
-
2.0
-
-
0.18
-
Output Voltage
Full
±10
-
-
±10
-
-
Output Current
25
±10
-
-
±10
-
-
Full Power Bandwidth
Note 4
25
-
600
-
-
600
-
Output Resistance
Hold Mode
25
-
1.0
-
-
1.0
-
Total Output Noise (DC to 10MHz)
Sample
25
-
125
200
-
125
200
Hold
25
-
125
200
-
125
200
UNITS
V
MΩ
pF
mV
mV
nA
nA
nA
nA
V
dB
µV/ ^oC
V/V
MHz
MHz
V
mA
kHz
Ω
µV_RMS
µV_RMS
2