HA-5033 Datasheet, PDF (2/9 Pages) Intersil Corporation – 250MHz Video Buffer

HA-5033
Absolute Maximum Ratings
Voltage Between V+ and V- Pins . . . . . . . . . . . . . . . . . . . . . . . . 40V
DC Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V+ to V-
Output Current (Peak) (50ms On/1 Second Off) . . . . . . . . . ±200mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . . 2000V
Operating Conditions
Temperature Ranges
HA-5033-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55^oC to 125^oC
HA-5033-5 (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 75^oC
HA9P5033-5 (Notes 1, 3) . . . . . . . . . . . . . . . . . . . . -40^oC to 60^oC
Thermal Information
Thermal Resistance (Typical, Note 2)
θ_JA (^oC/W) θ_JC (^oC/W)
Metal Can Package . . . . . . . . . . . . . . .
65
34
PDIP Package . . . . . . . . . . . . . . . . . . .
96
N/A
PSOP Package (Note 4) . . . . . . . . . . . 129
N/A
PLCC Package. . . . . . . . . . . . . . . . . . .
80
N/A
Maximum Junction Temperature (Note 1) . . . . . . . . . . . . . . . . .175^oC
Maximum Junction Temperature (Plastic Packages) . . . . . . .150^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300^oC
(PSOP and PLCC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Maximum power dissipation, including load conditions, must be designed to maintain the maximum junction temperature below 175^oC for the metal
can package, and below 150^oC for the plastic packages (See Figure 5.).
2.
3.
θ_{MinJgaAx1iism50muomeCao.spTuehrereadtmiwnagitxhtiemtmhuepmecrooapmteuprroaentiinnegnthttememPoSupneOtrePadtuporaenckmaanagyeevhisaallvuimeatittiooendbetPoCd6e0bro}oaCater,ddfofinruVrftrh_See_Uer_{P,aPdirLe.Yp=en±d1in2gV}
to prevent the
on the output
junction temperature from exceed-
load condition. The operating tem-
perature may be increased if the HA9P5033 is operated at lower V_SUPPLY. For example, the quiescent operating temperature may be increased
4.
to 75^oC by operating at V_SUPPLY ≤ ±9.7V. See
Direct attach of the PSOP copper slug to copper
Figure 5 for
area on the
more information.
PCB can reduce the
θ_JA
value
to
<100^oC/W.
Consult
the
Intersil
Application
Group
for more information.
Electrical Specifications V_SUPPLY = ±12V, R_S = 50Ω, R_L = 100Ω, C_L = 10pF, Unless Otherwise Specified
PARAMETER
TEST
CONDITIONS
TEMP.
(^oC)
HA-5033-2
MIN
TYP MAX
HA-5033-5
MIN
TYP MAX
INPUT CHARACTERISTICS
Offset Voltage
25
-
5
15
-
5
15
Full
-
6
25
-
6
25
Average Offset Voltage Drift
Full
-
33
-
-
33
-
Bias Current
25
-
20
35
-
20
35
Full
-
30
50
-
30
50
Input Resistance
25
-
3
-
-
3
-
Input Capacitance
25
-
1.6
-
-
1.6
-
Input Noise Voltage
10Hz to 100MHz
25
-
20
-
-
20
-
TRANSFER CHARACTERISTICS
Voltage Gain
-3dB Bandwidth
R_L = 100Ω
R_L = 1kΩ
R_L = 100Ω
25
0.93
-
-
0.93
-
-
25
0.93
0.99
-
0.93 0.99
-
Full 0.92
-
-
0.92
-
-
25
-
250
-
-
250
-
OUTPUT CHARACTERISTICS
Output Voltage Swing
Output Current
R_L = 100Ω
R_L = 1kΩ, V_S = ±15V
Full
±8
±10
-
Full
±11
±12
-
25
±80
±100
-
±8
±10
-
±11
±12
-
±80 ±100
-
Output Resistance
25
-
8
-
-
8
-
Full Power Bandwidth
V_OUT = 1V_RMS, R_L = 1kΩ
25
-
146
-
-
146
-
Full Power Bandwidth (Note 5)
25
15.9
17.5
-
15.9 17.5
-
TRANSIENT RESPONSE
Rise Time
Propagation Delay
V_OUT = 500mV
25
-
4.6
-
25
-
1
-
-
4.6
-
-
1
-
Overshoot
25
-
3
-
-
3
-
Slew Rate (Note 5)
25
1
1.1
-
1
1.1
-
UNITS
mV
mV
µV/^oC
µA
µA
MΩ
pF
µV_P-P
V/V
V/V
V/V
MHz
V
V
mA
Ω
MHz
MHz
ns
ns
%
V/ns
2