ACTS374MS Datasheet, PDF (2/10 Pages) Intersil Corporation – Radiation Hardened Octal D Flip-Flop, Three-State

Specifications ACTS374MS
Absolute Maximum Ratings
Reliability Information
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.0V
Input Voltage Range . . . . . . . . . . . . . . . . . . . . . .-0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . . . .±50mA
Storage Temperature Range (TSTG) . . . . . . . . . . . -65^oC to +150^oC
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +265^oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175^oC
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
(All Voltages Reference to VSS)
Thermal Impedance
θ_JA
DIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72^oC/W
Flatpack . . . . . . . . . . . . . . . . . . . . . . . . . . 107^oC/W
Maximum Package Power Dissipation at +125^oC
θ_JC
24^oC/W
28^oC/W
DIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7W
Flatpack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5W
Maximum Device Power Dissipation. . . . . . . . . . . . . . . . . . .(TBD)W
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Gates
CAUTION: As with all semiconductors, stress listed under “Absolute Maximum Ratings” may be applied to devices (one at a time) without resulting in permanent
damage. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed
under “Electrical Performance Characteristics” are the only conditions recommended for satisfactory device operation.
Operating Conditions
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Input Rise and Fall Times at 4.5V VCC (TR, TF) . . . . . . 10ns/V Max
Operating Temperature Range (T_A) . . . . . . . . . . . . -55^oC to +125^oC
Input High Voltage (VIH) . . . . . . . . . . . . . . . . . . . . . VCC to VCC/2V
Input Low Voltage (VIL). . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to 0.8V
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
SYMBOL
(NOTE 1)
CONDITIONS
GROUP
A SUB-
GROUPS
Supply Current
ICC
VCC = 5.5V,
1
VIN = VCC or GND
2, 3
Output Current
IOH
VCC = VIH = 4.5V,
1
(Source)
VOUT = VCC -0.4V,
VIL = 0V, (Note 2)
2, 3
Output Current
(Sink)
IOL
VCC = VIH = 4.5V,
1
VOUT = 0.4V, VIL = 0V,
(Note 2)
2, 3
Output Voltage High
VOH
VCC = 5.5V, VIH = 2.75V
VIL = 0.8V, IOH = -50µA
1, 2, 3
VCC = 4.5V, VIH = 2.25V,
VIL = 0.8V, IOH = -50µA
1, 2, 3
Output Voltage Low
VOL
VCC = 5.5V, VIH = 2.75V
VIL = 0.8V, IOH = 50µA
1, 2, 3
VCC = 4.5V, VIH = 2.25V,
VIL = 0.8V, IOH = 50µA
1, 2, 3
Input Leakage
IIN
VCC = 5.5V,
1
Current
VIN = VCC or GND
2, 3
Three-State Output
Leakage Current
IOZ
VCC = 5.5V,
1
Force Voltage = 0V or VCC
2, 3
Noise Immunity
Functional Test
FN
VCC = 4.5V, VIH = 2.25V, 7, 8A, 8B
VIL = 0.8V, (Note 3)
LIMITS
TEMPERATURE
+25^oC
+125^oC, -55^oC
+25^oC
+125^oC, -55^oC
MIN MAX
-
20
-
400
-12
-
-8
-
+25^oC
+125^oC, -55^oC
12
-
8
-
+25^oC, +125^oC, -55^oC VCC -0.1 -
+25^oC, +125^oC, -55^oC VCC -0.1 -
+25^oC, +125^oC, -55^oC
-
0.1
+25^oC, +125^oC, -55^oC
-
0.1
+25^oC
-
+125^oC, -55^oC
-
+25^oC
-
+125^oC, -55^oC
-
+25^oC, +125^oC, -55^oC
-
±0.5
±1.0
±1
±35
-
NOTE:
1. All voltages referenced to device GND.
2. Force/measure functions may be interchanged.
3. For functional tests, VO ≥4.0V is recognized as a logic “1”, and VO ≤0.5V is recognized as a logic “0”.
UNITS
µA
µA
mA
mA
mA
mA
V
V
V
V
µA
µA
µA
µA
V
Spec Number 518828
2