ACTS00MS Datasheet, PDF (2/8 Pages) Intersil Corporation – Radiation Hardened Quad 2-Input NAND Gate

Specifications ACTS00MS
Absolute Maximum Ratings
Reliability Information
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.0V
Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VCC +0.5V
DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA
DC Drain Current, Any One Output. . . . . . . . . . . . . . . . . . . . . . .±50mA
Storage Temperature Range (TSTG) . . . . . . . . . . . -65^oC to +150^oC
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +265^oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175^oC
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
(All Voltages Reference to VSS)
Thermal Impedance
θ_JA
DIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74^oC/W
Flatpack . . . . . . . . . . . . . . . . . . . . . . . . . . 116^oC/W
Maximum Package Power Dissipation at +125^oC
θ_JC
24^oC/W
30^oC/W
DIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7W
Flatpack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4W
Maximum Device Power Dissipation. . . . . . . . . . . . . . . . . . .(TBD)W
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Supply Voltage Range . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Input Rise and Fall Time at 4.5V VCC (TR, TF) . . . . . . . 10ns/V Max
Operating Temperature Range . . . . . . . . . . . . . . . . -55^oC to +125^oC
Input High Voltage (VIH) . . . . . . . . . . . . . . . . . . . . . VCC to VCC/2V
Input Low Voltage (VIL). . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to 0.8V
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
Supply Current
SYMBOL
(NOTE 1)
CONDITIONS
ICC
VCC = 5.5V,
VIN = VCC or GND
Output Current
(Source)
Output Current
(Sink)
Output Voltage High
Output Voltage Low
Input Leakage
Current
IOH
IOL
VOH
VOL
IIN
VCC = VIH = 4.5V,
VOUT = VCC -0.4V,
VIL = 0V, (Note 2)
VCC = VIH = 4.5V,
VOUT = 0.4V, VIL = 0V,
(Note 2)
VCC = 5.5V, VIH = 2.75V,
VIL = 0.80V, IOH = -50µA
VCC = 4.5V, VIH = 2.25V,
VIL = 0.80V, IOH = -50µA
VCC = 5.5V, VIH = 2.75V,
VIL = 0.80V, IOH = 50µA
VCC = 4.5V, VIH = 2.25V,
VIL = 0.80V, IOH = 50µA
VCC = 5.5V,
VIN = VCC or GND
Noise Immunity
Functional Test
FN
VCC = 4.5V, VIH = 2.25V,
VIL = 0.80V, (Note 3)
GROUP
A SUB-
GROUPS
1
2, 3
1
2, 3
1
2, 3
1, 2, 3
LIMITS
TEMPERATURE
MIN MAX
+25^oC
-
5
+125^oC, -55^oC
-
100
+25^oC
-12
-
+125^oC, -55^oC
-8
-
+25^oC
12
-
+125^oC, -55^oC
8
-
+25^oC, +125^oC, -55^oC VCC -0.1 -
1, 2, 3
+25^oC, +125^oC, -55^oC VCC -0.1 -
1, 2, 3
+25^oC, +125^oC, -55^oC
-
0.1
1, 2, 3
+25^oC, +125^oC, -55^oC
-
0.1
1
+25^oC
-
2, 3
+125^oC, -55^oC
-
7, 8A, 8B +25^oC, +125^oC, -55^oC
-
±0.5
±1.0
-
UNITS
µA
µA
mA
mA
mA
mA
V
V
V
V
µA
µA
V
NOTES:
1. All voltages reference to device GND.
2. Force/measure functions may be interchanged.
3. For functional tests, VO ≥4.0V is recognized as a logic “1”, and VO ≤0.5V is recognized as a logic “0”.
Spec Number 518822
2