ISL28133_11 Datasheet, PDF (17/20 Pages) Intersil Corporation – Single Micropower, Chopper Stabilized, RRIO Operational Amplifier

ISL28133
v
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
REVISION
CHANGE
5/31/11
FN6560.5
Changed minimum operating supply voltage from +1.65V to +1.8V throughout entire datasheet.
Added Tjc information for 5 Ld SOT-23 package in Thermal information on page 5.
2/1/11
FN6560.4
-Converted to Updated Intersil Template.
-Page 1 Graphics numbered as Figures 1 and 2.
-Updated Ordering Information on page 2 by adding part ISL28133FHZ-T7A.
-Changed Note on page 5, which read “Parameters with MIN and/or MAX limits are 100% tested at +25°C,
unless otherwise specified. Temperature limits established by characterization and are not production tested.”
to “Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or
design.”
-Added two Long Term Drift Curves (Figures 37 and 38) and section “Long Term VOS Drift” on page 12
-Replaced POD MDP0038 (no dimension changes), now obsolete with P5.064A.
5/3/10
FN6560.3
Title Page 1: Replaced “Zero-Drift” with “Chopper Stabilized” for title and part description
On page 3: Pin Configuration: MTDFN -> uTDFN
On page 7: Figure 12: Changed 0.1Hz to 0.01Hz in Figure caption
On page 11: In “Functional Description”; Paragraph 1, 2nd sentence:
Changed text from "…open loop gain (200dB)…" -to- "…open loop gain (174dB)…"
Changed TYP for “Open Loop Gain” on page 4 from 200dB to 174dB.
On page 11: In “High Gain, Precision DC-Coupled Amplifier”; Paragraph 2, 1st sentence:
Changed text from
"...DC output error of only ±80mV with a maximum temperature drift of 0.75µV/°C."
to
"… DC output error of only ±80mV with a maximum temperature drift of 0.75mV/C."
2/24/10
Removed “Coming Soon” from ISL28133EVAL1Z in the ordering information table on pg 2.
09/24/09
FN6560.2
Converted to new Intersil template. Removed ISL28233 and ISL28433 from data sheet, added Applications,
Related Literature, Typical Application Circuit, Performance Curve,
updated ordering information by removing “coming soon” on SC70 and uTDFN packages and adding Eval board
listed as “coming soon”. Added Block Diagram, Changed in Abs Max Rating Voltage from “5.75V” to “6.5V”.
Removed Tjc from Thermal Information until provided by packaging scheduled for 9-11-09. Changed Low Offset
“drift” to Low Offset “TC”, added Max Junction Temp 140C, added SPICE model and simulation results, removed
supply current graph at +-3V, re-ordered typical performance curves, removed guard ring information from
application section. Added Revision History and Products Information
05/29/09
03/25/09
FN6560.1
FN6560.0
Page 4: Removed the RL = 100 Curve from Figures 3, 4 and 5.
Page 1: Under Features, removed the word "Output" from "Low Output Noise"
Initial Release to WEB
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a
complete list of Intersil product families.
*For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page
on intersil.com: ISL28133
To report errors or suggestions for this data sheet, please go to www.intersil.com/askourstaff
FITs are available from our website at http://rel.intersil.com/reports/search.php
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
17
FN6560.5
July 22, 2011