ISL71090SEH75 Datasheet, PDF (12/13 Pages) Intersil Corporation – RH voltage regulators precision outputs

ISL71090SEH75
Revision HistoryThe revision history provided is for informational purposes only and is believed to be accurate, but not warranted.
Please go to the web to make sure that you have the latest revision.
DATE
REVISION
CHANGE
March 18, 2016
FN8591.3
-Changed title from “Radiation Hardened Ultra Low Noise, Precision Voltage Reference” to “7.5V
Radiation Hardened Ultra Low Noise, Precision Voltage Reference”
-Updated Related Literature document titles to match titles on the actual documents.
-Added Table 1 to page 2.
-Corrected the Evaluation board part number in the Ordering Information table on page 2.
-On page 5:
-Changed Electrical Specification for Flatpack note from: "Boldface limits apply over the operating
temperature range, -55°C to +125°C and radiation.” to: "Boldface limits apply after radiation at
+25°C or across the operating temperature range, -55°C to +125°C without radiation, unless
otherwise specified.
-For parameter VOA (row 4) in Electrical Specifications for Flatpack table changed description from:
"VOUT Accuracy, Post Rad", to: "VOUT Accuracy at TA = +25°C, Post radiation” and for parameters
VOA (rows 2, 3, 4) added "Note 9" to Conditions column.
-On page 6:
-Changed Electrical Specification for Die note from: "Boldface limits apply over the operating
temperature range, -55°C to +125°C and radiation." To: "Boldface limits apply after radiation at
+25°C or across the operating temperature range, -55°C to +125°C without radiation, unless
otherwise specified.
-For parameter VOA (row 4) in Electrical Specifications for Die table changed description from: "VOUT
Accuracy, Post Rad", to: "VOUT Accuracy at TA = +25°C, Post radiation” and for parameters VOA for
Post radiation (row 4) added "Note 11" to Conditions column.
-Updated POD K8.A to the latest revision changes are as follows:
Modified Note 2 by adding the words “...in addition to or instead of...”
December 2, 2013
FN8591.2
Electrical spec table on page 5 (Flatpack) and page 6 (Die): V_OUT Accuracy Post Rad section, changed
the value for Min from -0.25% to -0.3% and Max from +0.25% to +0.3%.
October 4, 2013
FN8591.1
Initial Release.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 12
FN8591.3
March 18, 2016