ISL6208B_14 Datasheet, PDF (10/13 Pages) Intersil Corporation – High Voltage Synchronous Rectified Buck MOSFET Drivers

ISL6208, ISL6208B
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
DATE
REVISION
CHANGE
July 14, 2014
FN9115.7
Updated Phase voltage under “Absolute Maximum Ratings” on page 3 from “GND - 8V (<20ns Pulse Width,
10µJ)” to “GND - 10V (<20ns Pulse Width, 10µJ)”
Updated “Package Outline Drawing” on page 13 (M8.15) to the latest revision.
Updated Products verbiage to About Intersil verbiage on page 10.
January 17, 2012 FN9115.6 Added limits for “UGATE Turn-On Propagation Delay” and “LGATE Turn-On Propagation Delay” on page 4.
October 26, 2011 FN9115.5 Removed limits for “UGATE Turn-On Propagation Delay” and “LGATE Turn-On Propagation Delay” on page 4.
July 12, 2011
FN9115.4
Added “Revision History” on page 10 and “Products” on page 10.
Added ISL6208BCRZ and ISL6208BIRZ parts to “Ordering Information” on page 2. Removed leaded, obsolete
devices (ISL6208CB, ISL6208CR, ISL6208IB, ISL6208IR).
Updated Tape & Reel note in “Ordering Information” on page 2 from "Add "-T" suffix for tape and reel." to new
standard "Add "-T*" suffix for tape and reel." The "*" covers all possible tape and reel options
Added MSL note to “Ordering Information” on page 2
Added Pinout for ISL6208BIRZ and ISL6208BCRZ on page 2
Added “Thermal Information” on page 3 for new ISL6802B package, 8 Ld 2x2 DFN. Added Theta JC for SOIC
package and Note 9.
Removed "Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified.
Temperature limits established by characterization and are not production tested." from common conditions of
spec table. Added as Note in MIN MAX columns of “Electrical Specifications” table.
Added standard text "Boldface limits apply over the operating temp range" to common conditions of spec table.
Bolded applicable specs.
Updated “Package Outline Drawing” on page 13 (M8.15) as follows:
Updated to new POD format by removing table and moving dimensions onto drawing and adding land pattern
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 10
FN9115.7
July 14, 2014