X9252_14 Datasheet, PDF (1/19 Pages) Intersil Corporation – Quad Digitally-Controlled Potentiometer

X9252
Low Power + Quad 256-tap + 2-Wire Bus + Up/Down Interface
Data Sheet
July 24, 2014
FN8167.3
Quad Digitally-Controlled (XDCP™)
Potentiometer
The X9252 integrates 4 digitally controlled potentiometers
(XDCP) on a monolithic CMOS integrated circuit.
The digitally controlled potentiometers are implemented
using 255 resistive elements in a series array. Between each
pair of elements are tap points connected to wiper terminals
through switches. The position of each wiper on the array is
controlled by the user through the Up/Down (U/D) or 2-wire
bus interface. The wiper of each potentiometer has an
associated volatile Wiper Counter Register (WCR) and four
nonvolatile Data Registers (DRs) that can be directly written
to and read by the user. The contents of the WCR controls
the position of the wiper on the resistor array through the
switches. At power-up, the device recalls the contents of the
default data registers DR00, DR10, DR20, DR30, to the
corresponding WCR.
Each DCP can be used as a three-terminal potentiometer or
as a two terminal variable resistor in a wide variety of
applications including the programming of bias voltages, the
implementation of ladder networks, and three resistor
programmable networks.
Features
• Quad Solid State Potentiometer
• 256 Wiper Tap Points-0.4% Resolution
• 2-Wire Serial Interface for Write, Read, and Transfer
Operations of the Potentiometer
• Up/Down Interface for Individual Potentiometers
• Wiper Resistance: 40 Typical
• NonVolatile Storage of Wiper Positions
• Power On Recall. Loads Saved Wiper Position on
Power-Up.
• Standby Current < 100µA Max
• Maximum Wiper Current: 3mA
• V_CC: 2.7V to 5.5V Operation
• 2.8k and 10k Version of Total Pot Resistance
• Endurance: 100,000 Data Changes per Bit per Register
• 100 yr. Data Retention
• 24 Ld TSSOP
• Pb-Free (RoHS Compliant)
Pinout
X9252
(24 LD TSSOP)
TOP VIEW
DS0
1
A0
2
R_W3
3
R_H3
4
R_L3
5
U/D
6
V_CC
7
R_L0
8
R_H0
9
R_W0
10
A2
11
WP
12
24
DS1
23
SCL
22
R_L2
21
R_H2
20
R_W2
19
CS
18
V_SS
17
R_W1
16
R_H1
15
R_L1
14
A1
13
SDA
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2005, 2014. All Rights Reserved
Intersil (and design) and XDCP are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.