English
Language : 

X60008E-50 Datasheet, PDF (1/14 Pages) Intersil Corporation – Precision 5.0V FGA Voltage Reference
®
Data Sheet
March 14, 2005
X60008E-50
FN8145.0
Precision 5.0V FGA™ Voltage Reference
FEATURES
• Output Voltage: 5.000V
• Absolute Initial Accuracy = ±5mV
• Ultra Low Power Supply Current: 500nA
• Low Temperature Coefficient = 20ppm/°C max
• 10 mA Source & Sink Current Capability
• 10 ppm/1000hrs Long Term Stability
• Very Low Dropout Voltage: 100 mV @ no load
• Supply Voltage Range: 5.1V to 9.0V
• 5kV ESD (Human Body Model)
• Standard Package: SOIC-8
• Temp Range: -40°C to +85°C
DESCRIPTION
The X60008-50 FGA™ voltage references are very
high precision analog voltage references fabricated in
Intersil’s proprietary Floating Gate Analog technology,
which achieves superior levels of performance when
compared to conventional band gap, buried zener, or
XFET™ technologies.
FGA™ voltage references feature very high initial
accuracy, very low temperature coefficient, excellent
long term stability, low noise and excellent line and
load regulation, at the lowest power consumption
currently available. These voltage references enable
advanced applications for precision industrial &
portable systems operating at significantly higher
accuracy and lower power levels than can be achieved
with conventional technologies.
APPLICATIONS
• High Resolution A/Ds & D/As
• Digital Meters
• Calibration Systems
• V-F Converters
• Precision Current Sources
• Precision Regulators
• Precision Oscillators
• Battery Management Systems
• Smart sensors
• Strain Gage Bridges
• Threshold Detectors
• Servo Systems
TYPICAL APPLICATION
VIN = +6.5V
VIN VOUT
X60008-50
GND
0.1µF
Serial
Bus
10µF
0.001µF(*)
REF IN
Enable
SCK
SDAT
16 to 24-bit
A/D Converter
(*)Also see Figure 3 in Applications Information
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.