X60003 Datasheet, PDF (1/16 Pages) Intersil Corporation – Calibration systems

DATASHEET
Precision SOT-23 FGA™ Voltage References
X60003
The X60003 FGA™ voltage references is a very high precision
analog voltage reference fabricated in Intersil’s proprietary
Floating Gate Analog technology, which achieves superior levels
of performance when compared to conventional band gap,
buried zener, or X_FET™ technologies.
FGA™ voltage references feature very high initial accuracy, very
low temperature coefficient, excellent long term stability, low
noise and excellent line and load regulation, at the lowest power
consumption currently available. These voltage references
enable advanced applications for precision industrial and
portable systems operating at significantly higher accuracy and
lower power levels than can be achieved with conventional
technologies.
Applications
• High resolution A/Ds and D/As
• Digital meters
• Calibration systems
• V-F converters
• Precision current sources
• Precision regulators
• Precision oscillators
• Smart sensors
• Strain gage bridges
• Threshold detectors
• Battery management systems
• Servo systems
Features
• Reference output voltage . . . . . . . . . . . . . . . . 4.096V, 5.000V
• Initial accuracy . . . . . . . . . . . . . . . . . . . . . . . ±1.0mV (B grade)
• Ultra low power supply current . . . . . . . . . . . . . . . . . . . . 500nA
• Low temperature coefficient (B grade) . . . . . . . . . 10ppm/°C
• 10mA source and sink current capability
• Very low dropout voltage . . . . . . . . . . . . . . 100mV at No Load
• Input voltage range
- X60003-41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V to 9.0V
- X60003-50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1V to 9.0V
• 5kV ESD (human body model)
• Standard package . . . . . . . . . . . . . . . . . . . . . . . . . 3 Ld SOT-23
• Temp range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Related Literature
• See AN1494, “Reflow and PC Board Assembly Effects on
Intersil FGA References”
• See AN1533, “X-Ray Effects on Intersil FGA References”
800
HIGH
700
600
TYP
500
400
LOW
300
200
4.0
5.0
6.0
7.0
8.0
9.0
V_IN (V)
FIGURE 1. I_IN vs V_IN (3 UNITS)
September 1, 2015
FN8137.5
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2005, 2006, 2010, 2011, 2014, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.