|
TW2824_15 Datasheet, PDF (1/2 Pages) Intersil Corporation – 4-Channel Video QUAD/MUX Controller for Security Applications | |||
|
NOT RECOMMENDED FOR NEW DESIGNS
RECOMMENDED REPLACEMENT PART
TW2837
To request the full datasheet, please visit www.intersil.com/products/TW2824
4-Channel Video QUAD/MUX Controller for
Security Applications
TW2824
The TW2824 has four high quality NTSC/PAL video
decoders, dual color display controllers and dual
video encoders. The TW2824 contains four 10-bit
analog-to-digital converters, proprietary digital
gain/clamp controller, high quality Y/C separator to
reduce cross-noise and high performance dual
scaler to provide various pictures. Four built-in
motion and blind detectors can increase the feature
of the security system. The TW2824 has a flexible
video display controller including QUAD and MUX
basic functions. The TW2824 also has an excellent
graphic overlay function which displays
character/bitmap, box and mouse pointer. The
TW2824 contains two video encoders with four 10-
bit digital-to-analog converters for providing 2
composite or S-video.
Features
Four Video Decoders
ï· Accepts all NTSC/PAL standard formats with
auto detection
ï· Integrated four anti-aliasing filters and 10-bit
CMOS ADCs
ï· High performance adaptive comb filters for all
NTSC/PAL standards
ï· IF compensation filter for improvement of color
demodulation
ï· PAL delay lines for correcting PAL phase errors
ï· Programmable hue, saturation, contrast,
brightness and sharpness
ï· Dual high performance horizontal and vertical
scaler for each channel.
ï· Four built-in motion detectors with 16x12 cells
and blind detectors
Dual Video Controllers
ï· Additional 1-channel digital input for playback or
cascade operation
ï· Full live/strobe/switch function
ï· Auto sequence switch with 64 queues and/or
manual switch by interrupt
ï· Various channel attribute control
ï· Image enhancement for still image
ï· High performance 2x zoom for horizontal and
vertical direction
ï· Supports save and recall function
ï· Last image capture when video-loss
ï· Extendable to 8-/12-/16-channel video controller
using cascade connection
ï· Path-to-path cascade
ï· Character/bitmap overlay for OSD
ï· 16 programmable single boxes
ï· 4 2D arrayed boxes for motion result display
ï· Mouse pointer overlay
Dual Video Encoders
ï· 2 path digital outputs with ITU-R BT.656
standards
ï· 2 path analog outputs with all analog NTSC/PAL
standards
ï· Supports CVBS or S-video for each path
ï· Programmable bandwidth for luminance and
chrominance path
ï· Four 10-bit video CMOS DACs
Applications
ï· Analog QUAD/MUX system
ï· 4-/8-/16-channel DVR system
ï· Car rear vision system
ï· Hair shop system
February 2, 2011 1
FN7738.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
|
▷ |