KAD5510P-50 Datasheet, PDF (1/26 Pages) List of Unclassifed Manufacturers – 10-Bit, 500MSPS A/D Converter

®
Data Sheet
KAD5510P-50
December 5, 2008
FN6811.0
10-Bit, 500MSPS A/D Converter
The KAD5510P-50 is a low-power, high-performance, 10-bit,
500MSPS analog-to-digital converter designed with Intersil’s
proprietary FemtoCharge™ technology on a standard
CMOS process. The KAD5510P-50 is part of a
pin-compatible portfolio of 10, 12 and 14-bit A/Ds with
sample rates ranging from 125MSPS to 500MSPS.
The device utilizes two time-interleaved 10-bit, 250MSPS
A/D cores to achieve the ultimate sample rate of 500MSPS.
A single 500MHz conversion clock is presented to the
converter, and all interleave clocking is managed internally.
A serial peripheral interface (SPI) port allows for extensive
configurability, as well as fine control of matching
characteristics (gain, offset, skew) between the two
converter cores. These adjustments allow the user to
minimize spurs associated with the interleaving process.
Digital output data is presented in selectable LVDS or CMOS
formats. The KAD5510P-50 is available in a 72-contact QFN
package with an exposed paddle. Performance is specified
over the full industrial temperature range (-40°C to +85°C).
Pin-Compatible Family
MODEL
RESOLUTION
KAD5514P-25
14
KAD5514P-21
14
KAD5514P-17
14
KAD5514P-12
14
KAD5512P-50
12
KAD5512P-25, KAD5512HP-25
12
KAD5512P-21, KAD5512HP-21
12
KAD5512P-17, KAD5512HP-17
12
KAD5512P-12, KAD5512HP-12
12
KAD5510P-50
10
SPEED
(MSPS)
250
210
170
125
500
250
210
170
125
500
Ordering Information
PART NUMBER SPEED
(Note)
(MSPS)
TEMP.
RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
KAD5510P-50Q72 500 -40 to +85 72 Ld QFN L72.10X10D
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and NiPdAu plate - e4 termination finish, which is RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free
peak reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
Features
• Programmable Gain, Offset and Skew control
• 1.3GHz Analog Input Bandwidth
• 60fs Clock Jitter
• Over-Range Indicator
• Selectable Clock Divider: ÷1 or ÷2
• Clock Phase Selection
• Nap and Sleep Modes
• Two’s Complement, Gray Code or Binary Data Format
• DDR LVDS-Compatible or LVCMOS Outputs
• Programmable Built-in Test Patterns
• Single-Supply 1.8V Operation
• Pb-Free (RoHS Compliant)
Applications
• Radar and Satellite Antenna Array Processing
• Broadband Communications
• High-Performance Data Acquisition
Key Specifications
• SNR = 60.0dBFS for f_IN = 250MHz (-1dBFS)
• SFDR = 73dBc for f_IN = 250MHz (-1dBFS)
• Power Consumption = 389mW
CLKP
CLKN
VINP
VINN
VCM
Clock Generation
&
Interleave Control
CLKOUTP
CLKOUTN
SHA
SHA
10-bit
250 MSPS
ADC
VREF
Digital
Error
Correction
10-bit
250 MSPS
ADC
VREF
1.25 V
+
–
SPI
Control
D[9:0]P
D[9:0]N
ORP
ORN
OUTFMT
OUTMODE
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
FemtoCharge is a trademark of Kenet Inc. Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.