ISL97632_10 Datasheet, PDF (1/9 Pages) Intersil Corporation – LED Driver with 1-Wire Dimming

®
Data Sheet
March 22, 2010
ISL97632
FN9239.3
LED Driver with 1-Wire Dimming
The ISL97632 represents an efficient and highly integrated
PWM boost LED driver that is suitable for 1.8” to 3.5” LCDs
that employ 2 to 7 white LEDs for backlighting. With
integrated Schottky diode, OVP, and dynamic digital
dimming capability, the ISL97632 provides a simple, reliable,
and flexible solution to the backlight designers.
The ISL97632 features a simple 1-Wire digital interface that
provides a 5-bit dimming control. The dimming signal adjusts
the FB voltage and therefore the LED brightness in a DC
manner in 32 linear steps. An EN pin can be used to provide
a zero brightness setting or shutdown power saving function.
The ISL97632 is available in the 8 Ld TDFN (2mmx3mm)
package. There are 14V, 18V, and 26V OVP options that are
suitable for 3, 4, and 7 LEDs (3.5V/20mA type) backlight
applications respectively. The ISL97632 is specified for
operation over the -40°C to +85°C ambient temperature at
input voltage from 2.4V to 5.5V.
Pinout
ISL97632
(8 LD 2x3 TDFN)
TOP VIEW
GND ₁
VIN 2
EN 3
SDIN 4
8 ^LX
7 VOUT
6 FBSW
5 FB
Typical Application Circuit
10µH OR 22µH
VIN
VIN
EN
SDIN
GND
LX
VOUT
FBSW
FB
Features
• 1-Wire 5-Bit Digital Dimming
• Drives Up to 7 LEDs in Series (3.5V/20mA type)
• OVP (14V, 18V and 26V for 3, 4, and 7 LEDs applications)
• Integrated Schottky Diode
• 2.4V to 5.5V input
• 86% Efficiency
• 1.4MHz Switching Frequency Allows Small LC
• Enable for Shutdown Function or Zero Brightness Setting
• 1µA Shutdown Current
• Internally Compensated
• 8 Ld TDFN (2mmx3mm)
• Pb-Free (RoHS Compliant)
Applications
• LED backlighting for
- Cell phones
- Smartphones
- MP3
- PMP
- Automotive Navigation Panel
- Portable GPS
Ordering Information
PART NUMBER
(Note)
TEMP PACKAGE
PART RANGE Tape and Reel
MARKING (°C)
(Pb-Free)
PKG.
DWG.
NO.
ISL97632IRT14ZT* ELB
ISL97632IRT14ZTK* ELB
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
ISL97632IRT18ZT* ELC
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
ISL97632IRT18ZTK* ELC
ISL97632IRT26ZT* ELD
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
ISL97632IRT26ZTK* ELD
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
* Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials, and
100% matte tin plate plus anneal (e3 termination finish, which is RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations). Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006-2008, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.