|
ISL96017_06 Datasheet, PDF (1/11 Pages) Intersil Corporation – 128-Tap DCP, 16kbit EEPROM, and I2C Serial Interface | |||
|
®
Data Sheet
128-Tap DCP, 16kbit EEPROM, and I2C
Serial Interface
This device integrates a 128-tap digitally controlled
potentiometer, 16kbit of EEPROM, and a 2-wire I2C serial
interface. The device is powered by a single 3.3V supply.
The potentiometer is available with total resistance of either
10k⦠or 50kâ¦.
The memory is organized in 128 pages of 16 bytes each, to
reduce total programming time. All programming signals are
generated on-chip.
The potentiometer is implemented with a combination of
CMOS switches and resistor elements. The position of the
wiper can be stored in non-volatile memory and then be
recalled upon a subsequent power-up. The three terminals
of the potentiometer are available for use as either a variable
resistor or a resistor divider.
Pinout
ISL96017
(8 LD TDFN)
TOP VIEW
RH 1
RW 2
RL 3
VDD 4
8 WP
7 SCL
6 SDA
5 GND
April 17, 2006
ISL96017
FN8243.1
Features
⢠Integrated Digitally Controlled Potentiometer
- 128-Tap Positions
- 10kâ¦, 50k⦠Total Resistance
- Monotonic Over Temperature
- Non-Volatile Wiper Position Storage
- 0 to VDD Terminal Voltage
⢠I2C Serial Interface
⢠16kbit EEPROM
- 50 Years Retention @ ⤠55°C
- 1,000,000 Cycles Endurance
⢠Single 3.3 ±0.3V Supply
⢠3mm x 3mm Thin DFN Package â 0.8mm Max Thickness,
0.65mm Pitch
⢠Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PART NUMBER
PART MARKING
ISL96017WIRT8Z* (Note) 96017WIZ
RTOTAL (kâ¦)
10
TEMP.
RANGE (°C)
-40 to 85
PACKAGE
8 Ld 3x3 TDFN (Pb-free)
PKG.
DWG. #
L8.3x3A
ISL96017UIRT8Z* (Note) 96017UIZ
50
-40 to 85
8 Ld 3x3 TDFN (Pb-free)
L8.3x3A
*Add "-TK" suffix for 1000 units tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
|
▷ |