ISL95854 Datasheet, PDF (1/2 Pages) Intersil Corporation – Single Phase PWM Regulator for IMVP8 CPUs

DATASHEET
To request the full datasheet, please visit www.intersil.com/products/isl95854
Single Phase PWM Regulator for IMVP8™ CPUs
ISL95854
The ISL95854, fully compliant with Intel IMVP8™
specifications, provides a complete solution for
microprocessor core power supply. It also provides a Voltage
Regulator (VR) with an integrated gate driver. The VR uses the
serial control bus (SVID) to communicate with the CPU and
achieves lower cost and smaller board area.
Based on Intersil’s Robust Ripple Regulator (R3™) technology,
the PWM modulator compared to traditional modulators, has
faster transient settling time, variable switching frequency
during load transients and has improved light load efficiency
with its ability to automatically change switching frequency.
The ISL95854 has several other key features. The output
supports DCR current sensing with single NTC thermistor for
DCR temperature compensation or accurate resistor current
sensing. The output comes with remote voltage sense,
programmable V_BOOT voltage, programmable I_CCMAX,
programmable voltage transition slew rate, adjustable
switching frequency, overcurrent protection and power-good
output.
Features
• Serial data bus
• Single output VR with integrated gate driver
• Precision core voltage regulation
- 0.5% system accuracy over temperature
- Enhanced load line accuracy
• Supports multiple current sensing methods
- Lossless inductor DCR current sensing
- Precision resistor current sensing
• Differential remote voltage sensing
• Programmable V_BOOT voltage at start-up
• Resistor programmable I_CCMAX and voltage transition
slew rate
• Adaptive body diode conduction time reduction
• System input power monitor
Applications
• Notebook computers
• Desktop computers
0.91
0.90
0.89
0.88
0.87
0.86
0.85
0.84
0.83
0.82
0.81
0.80
0
V_IN = 19V
V_IN = 12V
V_IN = 8V
6 12 18 24 30 36 42 48 54 60 66
I_OUT (A)
FIGURE 1. LOAD LINE REGULATION
May 26, 2015
FN8744.0
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2015. All Rights Reserved
Intersil (and design) and R3 technology are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.