ISL9237 Datasheet, PDF (1/40 Pages) Intersil Corporation – Optional ASGATE FET control

DATASHEET
Buck-Boost Narrow VDC Battery Charger with SMBus
Interface and USB OTG
ISL9237
The ISL9237 is a buck-boost Narrow Output Voltage DC (NVDC)
charger utilizing Intersil’s advanced R3™ Technology to provide
high light-load efficiency, fast transient response and seamless
DCM/CCM transitions for a variety of mobile and industrial
applications.
In Charge mode, the ISL9237 takes input power from a wide
range of DC power sources (conventional AC/DC charger
adapters, USB PD ports, travel adapters, etc.) and safely charges
battery packs with up to 3 cells in a series configuration.
ISL9237 supports On-the-Go (OTG) function for 2- and 3-cell
battery applications. When OTG function is enabled, the ISL9237
operates in the reverse Buck mode to provide 5V at the USB port.
As a NVDC topology charger, it also regulates the system output
to a narrow DC range for stable system bus voltage. The system
power can be provided from the adapter, battery or a
combination of both. The ISL9237 can operate with only a
battery, only an adapter or both connected. For Intel IMVP8
compliant systems, the ISL9237 includes PSYS functionality,
which provides an analog signal representing total platform
power. The PSYS output will connect to a wide range of Intersil
IMVP8 core regulators to provide an IMVP8 compliant power
domain function.
The ISL9237 has serial communication via SMBus/I²C that
allows programming of many critical parameters to deliver a
customized solution. These programming parameters include,
but are not limited to: Adapter current limit, charger current limit,
system voltage setting and trickle charging current limit.
Features
• Buck-boost NVDC charger for 1-, 2- or 3-cell Li-ion batteries
• Input voltage range 3.2V to 23.4V (no dead zone)
• System output voltage 2.4V to 13.824V
• System power monitor PSYS output, IMVP-8 compliant
• Up to 1MHz switching frequency
• LDO output for charger VDD
• Adapter current monitor (AMON)
• Battery discharging current monitor (BMON)
• PROCHOT# open-drain output, IMVP-8 compliant
• Allows trickle charging of depleted battery
• Optional ASGATE FET control
• Ideal diode control in Turbo mode
• Supports OTG function for 2- and 3-cell batteries
• SMBus and auto-increment I²C compatible
• Two-level adapter current limit available
• Pb-free (RoHS compliant)
• Package 4x4 32 Ld QFN
Applications
• Mobile devices with rechargeable batteries
• Industrial devices with rechargeable batteries
Related Literature
• UG075, “ISL9237EVAL2Z Evaluation Board User Guide”
VADP
OPTIONAL
Rs1
Q1
Q4
L1
Q2
Q3
VSYS
July 7, 2016
FN8723.3
CSIN
CSIP
ASGATE
ADP
ACIN
ACOK
PROCHOT#
AMON/BMON
BATGONE
OTGEN/CMIN
ISL9237
GND
VSYS
CSOP
CSON
BGATE
VBAT
OTGPG/CMOUT
Rs2
VBAT
FIGURE 1. TYPICAL APPLICATION CIRCUIT
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2016. All Rights Reserved
Intersil (and design) and R3 Technology are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.