ISL9200 Datasheet, PDF (1/11 Pages) Intersil Corporation – Charging System Safety Circuit

®
Data Sheet
October 4, 2005
ISL9200
FN9241.0
Charging System Safety Circuit
The ISL9200 is an integrated circuit (IC) optimized to provide
a Li-ion battery redundant safety protection from failures of a
charging system. The IC monitors the input voltage, the
battery voltage, and the charge current. When any of the
three parameters exceeds its limit, the IC turns off an internal
P-channel MOSFET to remove the power from the charging
system. In addition to the above protected parameters, the
IC also monitors its own internal temperature and turns off
the P-channel MOSFET when the die temperature exceeds
140°C. Together with the battery charger IC and the
protection module in a battery pack, the charging system
using the ISL9200 has triple-level protection and is two-fault
tolerant.
The IC is designed to turn on the internal PFET slowly to
avoid inrush current at power-up but will turn off the PFET
quickly when input overvoltage is detected, in order to
remove the power before any damage occurs. The ISL9200
has a logic warning output to indicate the fault and an enable
input to allow the system to remove the input power.
Ordering Information
PART #
PART
TEMP.
PKG.
MARKING RANGE (°C) PACKAGE DWG. #
ISL9200IRZ* _00Z
(Note)
-40 to 85 12 Ld 4x3 DFN L12.4x3
(Pb-free)
ISL9200EVAL1 ISL9200 Evaluation Board
*Add “-T” suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Typical Application Circuit
INPUT
VIN
C₁
OUT
ISL6292
BATTERY
CHARGER
R_ILIM
ISL9200
ILIM
VB
EN
GND
WRN
R_VB
+
BATTERY
PACK
Features
• Fully Integrated Protection Circuit for Three Protection
Variables
- User Programmable Overcurrent Protection Threshold
- Input Overvoltage Protection in Less Than 1µs
- Battery Overvoltage Protection
• High Immunity of False Triggering Under Transients
• High Accuracy Protection Thresholds
• Warning Output to Indicate the Occurrence of Faults
• Enable Input
• Thermal Enhanced DFN Package
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Cell Phones
• Digital Still Cameras
• PDAs and Smart Phones
• Portable Instruments
• Desktop Chargers
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Technical Brief TB379 “Thermal Characterization of
Packaged Semiconductor Devices”
• Technical Brief TB389 “PCB Land Pattern Design and
Surface Mount Guidelines for QFN Packages”
Pinout
ISL9200 (4x3 DFN)
TOP VIEW
VIN 1
VIN 2
GND 3
WRN 4
NC 5
NC 6
EPAD
12 NC
11 OUT
10 OUT
9 ILIM
8 VB
7 EN
NOTE: EPAD must be electrically connected to the GND pin.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.