ISL8843_15 Datasheet, PDF (1/13 Pages) Intersil Corporation – Industry Standard Single-Ended Current Mode PWM Controller

Data Sheet
September 14, 2015
ISL8843
FN9238.2
Industry Standard Single-Ended Current
Mode PWM Controller
The ISL8843 is an industry standard drop-in replacement for
the popular 28C43 and 18C43 PWM controllers suitable for
a wide range of power conversion applications including
boost, flyback, and isolated output configurations. Its fast
signal propagation and output switching characteristics
make this an ideal product for existing and new designs.
Features include 30V operation, low operating current, 90A
start-up current, adjustable operating frequency to 2MHz,
and high peak current drive capability with 20ns rise and fall
times.
PART NUMBER
ISL8843
RISING UVLO
8.4V
MAX. DUTY CYCLE
100%
Ordering Information
PKG.
PART
TEMP.
DWG.
PART NUMBER MARKING RANGE (°C) PACKAGE #
ISL8843ABZ
(See Note)
8843 ABZ -40 to 105 8 Ld SOIC M8.15
(Pb-free)
ISL8843AUZ
(See Note) (No
longer available,
recommended
replacement:
ISL8843AAUZ)
8843Z
-40 to 105 8 Ld
MSOP
(Pb-free)
M8.118
ISL8843MBZ
(See Note)
8843 MBZ -55 to 125 8 Ld SOIC M8.15
(Pb-free)
ISL8843MUZ
(See Note) (No
longer available,
recommended
replacement:
ISL8843AMUZ)
843MZ
-55 to 125 8 Ld
MSOP
(Pb-free)
M8.118
Add -T to part number for Tape and Reel packaging.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• 1A MOSFET gate driver
• 90A start-up current, 125A maximum
• 35ns propagation delay current sense to output
• Fast transient response with peak current mode control
• 30V operation
• Adjustable switching frequency to 2MHz
• 20ns rise and fall times with 1nF output load
• Trimmed timing capacitor discharge current for accurate
deadtime/maximum duty cycle control
• 1.5MHz bandwidth error amplifier
• Tight tolerance voltage reference over line, load, and
temperature
• ±3% current limit threshold
• Pb-free plus anneal available and ELV, WEEE, RoHS
Compliant
Applications
• Telecom and datacom power
• Wireless base station power
• File server power
• Industrial power systems
• PC power supplies
• Isolated buck and flyback regulators
• Boost regulators
Pinout
ISL8843
(8 LD SOIC, MSOP)
TOP VIEW
COMP 1
FB 2
CS 3
RTCT 4
8 VREF
7 VDD
6 OUT
5 GND
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas LLC
Copyright © Intersil Americas LLC 2005, 2006, 2015 All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.