ISL8484_14 Datasheet, PDF (1/13 Pages) Intersil Corporation – Ultra Low ON-Resistance, +1.65V to +4.5V,Single Supply, Dual SPDT Analog Switch

®
Data Sheet
May 12, 2008
ISL8484
FN6128.5
Ultra Low ON-Resistance, +1.65V to +4.5V,
Single Supply, Dual SPDT Analog Switch
The Intersil ISL8484 device is a low ON-resistance, low
voltage, bidirectional, dual single-pole/double-throw (SPDT)
analog switch designed to operate from a single +1.65V to
+4.5V supply. Targeted applications include battery powered
equipment that benefit from low r_ON (0.29Ω) and fast
switching speeds (t_ON = 40ns, t_OFF = 20ns). The digital logic
input is 1.8V logic-compatible when using a single +3V supply.
With a supply voltage of 4.2V and logic high voltage of 2.85V
at both logic inputs, the part draws only 12µA max of I+
current.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL8484 is offered in small form factor packages, alleviating
board space limitations.
The ISL8484 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally closed (NC) switches. This configuration can be
used as a dual 2-to-1 multi-plexer. The ISL8484 is pin
compatible with the MAX4684 and MAX4685.
TABLE 1. FEATURES AT A GLANCE
ISL8484
NUMBER OF SWITCHES
2
SW
SPDT or 2-1 MUX
4.3V r_ON
4.3V t_ON/t_OFF
3V r_ON
3V t_ON/t_OFF
1.8V r_ON
1.8V t_ON/t_OFF
Packages
0.29Ω
40ns/20ns
0.33Ω
50ns/27ns
0.55Ω
70ns/54ns
10 Ld 3x3 Thin DFN, 10 Ld MSOP
Features
• Pin Compatible Replacement for the MAX4684 and
MAX4685
• ON-Resistance (r_ON)
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.29Ω
- V+ = +3.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.33Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.55Ω
• r_ON Matching Between Channels . . . . . . . . . . . . . . . . . 0.06Ω
• r_ON Flatness Across Signal Range . . . . . . . . . . . . . . . . 0.03Ω
• Single Supply Operation . . . . . . . . . . . . . . . +1.65V to +4.5V
• Low Power Consumption (P_D). . . . . . . . . . . . . . . <0.45µW
• Fast Switching Action (V+ = +4.3V)
- t_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
- t_OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ns
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>8kV
• Guaranteed Break-Before-Make
• 1.8V Logic Compatible (+3V supply)
• Low I+ Current when V_INH is not at the V+ Rail
• Available in 10 Ld 3x3 TDFN and 10 Ld MSOP
• Pb-Free Available (RoHS Compliant)
Applications
• Battery-powered, Handheld, and Portable Equipment
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and Video Switching
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006-2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.