ISL84684 Datasheet, PDF (1/11 Pages) Intersil Corporation – Ultra Low ON-Resistance, Low Voltage, Single Supply, Dual SPDT Analog Switch

®
Data Sheet
June 2004
ISL84684
FN6088
Ultra Low ON-Resistance, Low Voltage,
Single Supply, Dual SPDT Analog Switch
The Intersil ISL84684 device is a low ON-resistance, low
voltage, bidirectional, dual single-pole/double-throw (SPDT)
analog switch designed to operate from a single +1.65V to
+3.6V supply. Targeted applications include battery powered
equipment that benefit from low R_ON (0.25Ω) and fast
switching speeds (t_ON = 14ns, t_OFF = 6ns). The digital logic
input is 1.8V logic-compatible when using a single +3V supply.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL84684 is offered in small form factor packages, alleviating
board space limitations.
The ISL84684 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally (NC) switches. This configuration can be used as a
dual 2-to-1 multiplexer. The ISL84684 is pin compatible with
the MAX4684 and MAX4685.
TABLE 1. FEATURES AT A GLANCE
ISL84684
Number of Switches
2
SW
SPDT or 2-1 MUX
3V R_ON
3V t_ON/t_OFF
1.8V R_ON
1.8V t_ON/t_OFF
Packages
0.25Ω
12ns/5ns
0.4Ω
20ns/8ns
10 Ld 3x3 Thin DFN, 10 Ld MSOP
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
Features
• Pb-Free Available as an Option (see Ordering Info)
• Drop in Replacement for the MAX4684 and MAX4685
• ON Resistance (R_ON)
- V+ = +2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.29Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4Ω
• R_ON Matching Between Channels . . . . . . . . . . . . . . . 0.03Ω
• R_ON Flatness Across Signal Range . . . . . . . . . . . . . . 0.03Ω
• Single Supply Operation . . . . . . . . . . . . . . . +1.65V to +3.6V
• Fast Switching Action (V+ = +2.7V)
- t_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14ns
- t_OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6ns
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>9kV
• Guaranteed Break-before-Make
• 1.8V Logic Compatible (+3V supply)
• Available in 10 lead 3x3 Thin DFN and 10 lead MSOP
Applications
• Battery powered, Handheld, and Portable Equipment
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and Video Switching
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.