ISL8010 Datasheet, PDF (1/12 Pages) Intersil Corporation – Monolithic 600mA Step-Down Regulator with Low Quiescent Current

®
Data Sheet
September 27, 2005
ISL8010
FN6191.0
Monolithic 600mA Step-Down Regulator
with Low Quiescent Current
The ISL8010 is a synchronous, integrated FET 600mA step-
down regulator with internal compensation. It operates with
an input voltage range from 2.5V to 5.5V, which
accommodates supplies of 3.3V, 5V, or a Li-Ion battery
source. The output can be externally set from 0.8V to V_IN
with a resistive divider.
The ISL8010 features automatic PFM/PWM mode control, or
PWM mode only. The PWM frequency is typically 1.4MHz
and can be synchronized up to 12MHz. The typical no load
quiescent current is only 120µA. Additional features include
a Power-Good output, <1µA shutdown current, short-circuit
protection, and over-temperature protection.
The ISL8010 is available in the 10 Ld MSOP package,
making the entire converter occupy less than 0.18in² of PCB
area with components on one side only. The 10 Ld MSOP
package is specified for operation over the full -40°C to
+85°C temperature range.
Features
• Less than 0.18in² footprint for the complete 600mA
converter
• Components on one side of PCB
• Max height 1.1mm MSOP10
• Power-Good (PG) output
• Internally-compensated voltage mode controller
• Up to 95% efficiency
• <1µA shutdown current
• 120µA quiescent current
• Hiccup mode overcurrent and over-temperature protection
• External synchronizable up to 12MHz
• Pb-free plus anneal available (RoHS compliant)
Applications
• PDA and pocket PC computers
Ordering Information
• Bar code readers
PART
NUMBER
ISL8010IUZ
(Note)
PART TAPE &
PKG.
MARKING REEL PACKAGE DWG. #
8010Z
- 10 Ld MSOP MDP0043
(Pb-free)
• Cellular phones
• Portable test equipment
• Li-Ion battery powered devices
ISL8010IUZ-T7 8010Z
7” 10 Ld MSOP MDP0043
• Small form factor (SFP) modules
(Note)
(Pb-free)
ISL8010IUZ-T13 8010Z
(Note)
13” 10 Ld MSOP MDP0043
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
Pinout and Typical Application Diagram
ISL8010
TOP VIEW
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
C₁
10µF
V_O (1.8V@600mA)
L₁
C₂
10µF
1.8µH
1 SGND
2 PGND
3 LX
FB 10
VO 9
PG 8
R₂*
100kΩ
R₁*
C₄
124kΩ
470pF
PG
V_S (2.5V-6V)
R₃
100Ω
4 VIN
5 VDD
EN 7
SYNC 6
EN
SYNC
C₃
0.1µF
R_{4 100kΩ}
R₆
100kΩ
R_{5 100kΩ}
* V_O = 0.8V * (1 + R₁ / R₂)
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.