ISL78301_15 Datasheet, PDF (1/10 Pages) Intersil Corporation – 40V, Low Quiescent Current, 150mA Linear Regulator for Automotive Applications

DATASHEET
40V, Low Quiescent Current, 150mA Linear Regulator
for Automotive Applications
ISL78301
The ISL78301 is a high voltage, low quiescent current linear
regulator ideally suited for “always-on” and “keep alive”
automotive applications. The ISL78301 operates from an input
voltage of +6V to +40V under normal operating conditions and
operates down to +3V under a cold crank. It consumes only 18µA
of quiescent current at no load on the adjustable version.
The ISL78301 is available in a fixed 3.3V, 5V and adjustable
output voltage (2.5V to 12V) options. It features an EN pin that
can be used to put the device into a low-quiescent current
shutdown mode where it draws only 2µA of supply current. The
device features over-temperature shutdown and current limit
protection.
The ISL78301 is AEC-Q100 qualified. It is rated over the -40°C to
+125°C automotive temperature range and is available in a
14 Ld HTSSOP with an exposed pad package.
Applications
• Automotive
• Industrial
• Telecommunications
Features
• Optimized for “always-on” automotive applications
• 18µA typical quiescent current
• Guaranteed 150mA output current
• Operates through cold crank down to 3V
• 40V tolerant logic level (TTL/CMOS) enable input
• 2µA of typical shutdown current
• Low dropout voltage of 295mV at 150mA
• Fixed +3.3V, +5.0V and adjustable output voltage options
• Stable operation with 10µF output capacitor
• Thermal shutdown and current limit protection
• -40°C to +125°C operating temperature range
• Thermally enhanced 14 Ld exposed pad HTSSOP package
• AEC-Q100 qualified
• 5kV ESD HBM rated
• Pb-free (RoHS compliant)
VIN = 14V
CIN
0.1µF
IN
EN
(ISL78301)
OUT
VOUT = 12V
R1
ADJ
COUT
10µF
R2
GND
FIGURE 1. TYPICAL APPLICATION - ADJ VERSION
25
VIN = 14V
CIN
0.1µF
IN
EN
(ISL78301)
OUT
VOUT = 5V
COUT
10µF
GND
FIGURE 2. TYPICAL APPLICATION - FIXED VERSION
20
15
10
5
0
-50
0
50
100
150
TEMPERATURE (°C)
FIGURE 3. QUIESCENT CURRENT vs LOAD CURRENT (ADJ VERSION AT UNITY GAIN) V_IN = 14V
April 7, 2015
FN6705.2
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2011, 2013, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.