English
Language : 

ISL71830SEH Datasheet, PDF (1/20 Pages) Intersil Corporation – Radiation Tolerant 5V 16-Channel Analog Multiplexer
DATASHEET
Radiation Tolerant 5V 16-Channel Analog Multiplexer
ISL71830SEH
The ISL71830SEH is a radiation tolerant, 16-channel
multiplexer that is fabricated using Intersil’s proprietary P6-SOI
process technology to provide excellent latch-up performance.
It operates with a single supply range from 3V to 5.5V and has
a 4-bit address line plus an enable that can be driven with
adjustable logic thresholds to conveniently select one of 16
available channels. An inactive channel is separated from the
active channel by a high impedance, which inhibits any
interaction between them.
The ISL71830SEH’s low rDS(ON) allows for improved signal
integrity and reduced power losses. The ISL71830SEH is also
designed for cold sparing, making it excellent for redundancy
in high reliability applications. It is designed to provide a high
impedance to the analog source in a powered off condition,
making it easy to add additional backup devices without
incurring extra power dissipation. The ISL71830SEH also has
analog overvoltage protection on the input that disables the
switch during an overvoltage event to protect upstream and
downstream devices.
The ISL71830SEH is available in a 28 Ld CDFP and operates
across the extended temperature range of -55°C to +125°C.
A 32-channel version is also available offered in a 48 Ld CQFP.
Refer to the ISL71831SEH datasheet for more information. For
a list of differences, refer to Table 1 on page 2.
Related Literature
• For a full list of related documents, visit our website
- ISL71830SEH product page
Features
• DLA SMD# 5962-15247
• Fabricated using P6 SOI process technology
• Rail-to-rail operation
• No latch-up
• Low rDS(ON). . . . . . . . . . . . . . . . . . . . . . . . . .<120Ω (maximum)
• Single supply operation . . . . . . . . . . . . . . . . . . . . . . 3V to 5.5V
- Adjustable logic threshold control
• Cold sparing capable . . . . . . . . . . . . . . . . . . . . . . . . -0.4V to 7V
• Analog overvoltage range . . . . . . . . . . . . . . . . . . . . -0.4V to 7V
• Switch input off leakage . . . . . . . . . . . . . . . . . . . . . . . . . 120nA
• Transition times (tAHL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70ns
• Internally grounded metal lid
• Break-before-make switching
• ESD protection ≥5kV (HBM)
• Operating temperature range. . . . . . . . . . . .-55°C to +125°C
• Radiation tolerance
- Low dose rate (0.01rad(Si)/s) . . . . . . . . . . . . . . .75krad(Si)
- SEL/SEB LETTH (V+ = 6.5V) . . . . . . . . . . . . . 60MeV•cm2/mg
• All lots are assurance tested to 75krad (0.01rad(Si)/s)
wafer-by-wafer.
Applications
• Telemetry signal processing
• Harsh environments
• Down-hole drilling
ISL71830SEH
IN01
IN02
IN03
.
.
.
IN16
OUT
ADC
4
ADDRESS
EN
FIGURE 1. TYPICAL APPLICATION
90
80
+125°C
70
+25°C
60
50
40
30
-55°C
20
10
0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
COMMON-MODE VOLTAGE (V)
FIGURE 2. rDS(ON) vs COMMON-MODE VOLTAGE (V+ = 5V)
November 18, 2016
1
FN8758.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC. 2015,2016. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.