English
Language : 

ISL7119RH Datasheet, PDF (1/2 Pages) Intersil Corporation – Radiation Hardened High Speed Dual Voltage Comparator
®
Data Sheet
October 8, 2008
ISL7119RH
FN6607.2
Radiation Hardened High Speed Dual
Voltage Comparator
The ISL7119RH is a radiation hardened high speed dual
voltage comparator fabricated on a single monolithic chip. It
is designed to operate over a wide dual supply voltage range
as well as a single 5V logic supply and ground. The open
collector output stage facilitates interfacing with a variety of
logic devices and has the ability to drive relays and lamps at
output currents up to 25mA.
The ISL7119RH is fabricated on our dielectrically isolated
Rad-hard Silicon Gate (RSG) process, which provides
immunity to Single Event Latch-up (SEL) and highly reliable
performance in the natural space environment.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed below must be used when ordering.
Detailed Electrical Specifications for the ISL7119RH are
contained in SMD 5962-07215. A “hot-link” is provided
on our website for downloading.
Pinouts
s
ISL7119RH
(10 LD FLATPACK GDFP1-F10 OR CDFP2-F10)
TOP VIEW
OUT 1
GND 1
+IN 1
-IN 1
-VS
1
10
2
9
3
8
4
7
5
6
+VS
-IN 2
+IN 2
GND 2
OUT 2
Features
• Electrically Screened to DSCC SMD # 5962-07215
• QML Qualified Per MIL-PRF-38535 Requirements
• Radiation Environment
- Total Dose. . . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si)
- SEL/SEB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Immune
• Input Offset Voltage (VIO). . . . . . . . . . . . . . . . . 8mV (Max)
• Input Bias Current (IBIAS) . . . . . . . . . . . . . .1000nA (Max)
• Input Offset Current (IIO) . . . . . . . . . . . . . . . .150nA (Max)
• Saturation Voltage @ ISINK = 3.2mA (VSAT) . 0.65V (Max)
• Saturation Voltage @ ISINK = 25mA (VSAT) . . 1.8V (Max)
• Response Time (tPD) . . . . . . . . . . . . . . . . . . . 160ns (Max)
Applications
• Window Detector
• Level Shifter
• Relay Driver
• Lamp Driver
Ordering Information
ORDERING
NUMBER
INTERNAL
MKT. NUMBER
5962F0721501QXC ISL7119RHQF
5962F0721501VXC ISL7119RHVF
5962F0721501V9A ISL7119RHVX
ISL7119RH/Proto ISL7119RHF/Proto
PART MARKING
Q 5962F07 21501QXC
Q 5962F07 21501VXC
ISL7 119RHF /Proto
TEMP. RANGE
(°C)
-55 to +125
-55 to +125
-55 to +125
-55 to +125
PACKAGE
10 Ld Flatpack
10 Ld Flatpack
10 Ld Flatpack
10 Ld Flatpack
PKG. DWG. #
K10.A
K10.A
K10.A
K10.A
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007, 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.