ISL59530_11 Datasheet, PDF (1/26 Pages) Intersil Corporation – 16x16 Video Crosspoint

Data Sheet
April 13, 2011
ISL59530
FN6220.8
16x16 Video Crosspoint
The ISL59530 is a 300MHz 16x16 Video Crosspoint Switch.
Each input has an integrated DC-restore clamp and an input
buffer. Each output has a fast On-Screen Display (OSD)
switch (for inserting graphics or other video) and an output
buffer. The switch is non-blocking, so any combination of
inputs to outputs can be chosen, including one channel
driving multiple outputs. The Broadcast Mode directs one
input to all 16 outputs. The output buffers can be individually
controlled through the SPI interface, the gain can be
programmed to x1 or x2, and each output can be placed into
a high impedance mode.
The ISL59530 offers a typical -3dB signal bandwidth of
300MHz. Differential gain of 0.025% and differential phase of
0.05°, along with 0.1dB flatness out to 50MHz, make the
ISL59530 suitable for many video applications.
The switch matrix configuration and output buffer gain are
programmed through an SPI/QSPI™-compatible three-wire
serial interface. The ISL59530 interface is designed to
facilitate both fast updates and initialization. On power-up, all
outputs are high impedance to avoid output conflicts.
The ISL59530 is available in both a 356 ball PBGA package
and 72 Ld QFN package and is specified over an extended
-40°C to +85°C temperature range.
The single-supply ISL59530 can accommodate input signals
from 0V to 3.5V and output voltages from 0V to 3.8V. Each
input includes a clamp circuit that restores the input level to
an externally applied reference in AC-coupled applications.
The ISL59531 is a fully differential input version of this device.
Features
• 16x16 non-blocking switch with buffered inputs and outputs
• 300MHz typical bandwidth
• 0.025%/0.05° dG/dP
• Output gain switchable x1 or x2 for each channel
• Individual outputs can be put in a high impedance state
• -90dB Isolation at 6MHz
• SPI digital interface
• Single +5V supply operation
• Pb-free (RoHS compliant)
Applications
• Security camera switching
• RGB routing
• HDTV routing
Ordering Information
PART
NUMBER
ISL59530IKZ
(Note 1)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL59530IKZ 356 Ld PBGA V356.27x27B
ISL59530IRZ ISL59530IRZ 72 Ld QFN
(Note 2)
L72.10x10C
NOTES:
1. These Intersil Pb-free WLCSP and BGA packaged products
employ special Pb-free material sets; molding compounds/die
attach materials and SnAgCu - e1 solder ball terminals, which
are RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free WLCSP and BGA
packaged products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
2. These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials,
and 100% matte tin plate plus anneal (e3 termination finish,
which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | IIntersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
Copyright © Intersil Americas Inc. 2006-2008, 2011. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.