ISL59117 Datasheet, PDF (1/10 Pages) Intersil Corporation – Triple Channel Video Driver with LPF

®
Data Sheet
September 21, 2006
ISL59117
FN6278.0
Triple Channel Video Driver with LPF
The ISL59117 is a triple channel reconstruction filter with a
-3dB roll-off frequency of 9MHz. Operating from single
supplies ranging from +2.5V to +3.6V and drawing only
3.9mA quiescent current, the ISL59117 is ideally suited for
low power, battery-operated applications. Additionally,
enable pins shut the part down in under 14ns.
The ISL59117 is designed to meet the needs for very low
power and bandwidth required in battery-operated
communication, instrumentation, and modern industrial
applications such as video on demand, cable set-top boxes,
MP3 players, and HDTV. The ISL59117 is offered in a
space-saving chipscale package guaranteed to a 0.57mm
maximum height constraint and specified for operation from
-40°C to +85°C temperature range.
Pinout
ISL59117 (WLCSP)
TOP VIEW
1
2
3
A
C_IN
GND
C_OUT
B
CVBS_IN
EN
CVBS_OUT
C
Y_IN
V_DD
Y_OUT
Features
• 3rd order 9MHz reconstruction filter
• 40V/µs slew rate
• Low supply current = 3.9mA
• Power-down current less than 1µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
• CSP package
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• MP3 players
• HDTV
• Personal video recorder
Block Diagram
+
-
Y_IN
5µA
500mV
C_IN
CVBS_IN
EN
+
-
5µA
BIASING &
CONTROL
9MHz
65mV
- + x2
Y_OUT
9MHz
65mV
- + x2
C_OUT
9MHz
65mV
- + x2
CVBS_OUT
Ordering Information
PART NUMBER (Note) PART MARKING
TAPE AND REEL TEMP. RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. #
ISL59117IIZ-T7
117Z
7”
-40 to +85
WLCSP
W3x3.9A
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.