|
ISL55164 Datasheet, PDF (1/2 Pages) Intersil Corporation – SOC Dual Channel 133MHz Pin Electronics Solution 3.75ns Minimum Pulse Width | |||
|
Get Full Datasheet
SOC Dual Channel 133MHz Pin Electronics Solution
ISL55164
The ISL55164 is a highly integrated System-on-a-Chip (SOC)
pin electronics solution aimed at incorporating every analog
function, along with some digital support functionality,
required on a per channel basis for Automated Test
Equipment, The interface, control and I/O of the chip are all
digital; all analog circuitry is inside the chip. Two complete
tester channels are integrated into each ISL55164.
The ISL55164 is pin and functionally compatible with Venus.
Features
⢠133MHz
⢠3.75ns Minimum Pulse Width
⢠Pin Electronics Driver/Comparator
- 3 Level Driver (DVH/DVL/VTT)
- 8V Driver Output Swings
- 16V Comparator Input Voltage Range
- Extremely Low HiZ Leakage over 16V Range
⢠Per Pin PMU
- FV, FI, MV, MI
- 8 Current Ranges (32mA, 8mA, 2mA, 512μA, 128μA,
32μA, 8μA, 2μA)
- +12V Super Voltage Capability
- Resistive Load (8 selectable resistor values)
⢠Deskew
- Propagation Delay Adjustment (up to 12.8ns range)
- Falling Edge Adjustment (up to ±3.2ns range)
- Auto Calibration via PLL
⢠On-Chip DC Levels
- 11 Levels/Pin
- Gain and Offset /Level
- DUT Ground Sensing/Pin
⢠3-Bit Serial CPU Port
- Load Internal Registers and Memory
- Read Back Internal States
⢠Flexible High Speed Digital Inputs and Outputs
- Selectable On-Chip Terminations for High Speed Inputs
- 50Ω Series Terminated High Speed for Comparator Outputs
⢠Package/Power Dissipation
- 64-Lead, 10mm x 10mm TQFP with Top Exposed Heat Slug
- Pdq ⤠1.10W/Channel; Pdq ⤠2.2W/Chip
Applications
⢠Automated Test Equipment
⢠Instrumentation
⢠ASIC Verifiers
2
DATA_0
2
EN_0
DVH-0
DVL-0
VTT-0
-
2
+
COMP_B_0
+
2
-
COMP_A_0
F/S
PMU
V-MU
-
+
+
-
March 7, 2011
1
FN7826.0
EXT_FORCE
DOUT_0
MONITOR
EXT_SENSE
DOUT_1
CVB-0
CVB-1
DVH-1
DVL-1
VTT-1
2
DATA_1
2
EN_1
2
COMP_B_1
CVA-0
CVA-1
2
COMP_A_1
CVA-PPMU-0
CVA-PPMU-1
CVB-PPMU-0
CVB-PPMU-1
FIGURE 1. BLOCK DIAGRAM
F/S
V-MU
PMU
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
|
▷ |