ISL55162 Datasheet, PDF (1/2 Pages) Intersil Corporation – SOC Dual Channel 300MHz Pin Electronics/DAC/PMU/Deskew

Get Full Datasheet
SOC Dual Channel 300MHz Pin Electronics/DAC/
PMU/Deskew
ISL55162
• Deskew
The ISL55162 is a highly integrated System-on-a-Chip (SOC) pin
electronics solution aimed at incorporating every analog
function, along with some digital support circuitry, required on a
per channel basis for Automated Test Equipment. The interface,
control and I/O of the chip are all digital; all analog circuitry is
inside the chip. Two complete tester channels are integrated into
- Propagation Delay Adjustment
- Falling Edge Adjustment
- Delay Range set by PLL Clock
• On-Chip DC Levels
- 11 Levels/Channel
- Gain and Offset Correction/Level
each chip.
- DUT Ground Sensing and Correction
ISL55162 is pin and functionally compatible with Venus, Venus
Plus and Venus 2.
• 3-Bit Serial CPU Port
• Flexible High Speed Digital Inputs and Outputs
- Selectable On-Chip Terminations for Inputs
CONFIDENTIAL ^Features
• Pin Electronics Driver/Comparator
- 3 Level Driver (DVH/DVL/VTT)
- 50Ω Series Termination for Comparator Outputs
• Lead Free Package
- 64-Lead, 10mmx10mm TQFP with Top Exposed Heat Slug
- Pdq < 1.1W/Channel
- 8V Driver Output Swings
- 16V Comparator Input Voltage Range
Applications
- Extremely Low HiZ Leakage over 16V Range
• Per Pin PMU
- FV, FI, MV, MI
- 4 Quadrant Operation
• Automated Test Equipment
• Instrumentation
• ASIC Verifiers
- 8 Current Ranges (32mA, 8mA, 2mA, 512μA, 128μA, 32μA,
8mA, 2μA)
- +13V Super Voltage Capability
- FI Voltage Clamps
- Resistive Load (8 selectable resistor values)
2
DATA_0
2
EN_0
DVH-0
DVL-0
VTT-0
2
COMP_B_0
COMP_A_0
V-FI-0
V-FV-0
V-Cl-Hi-0
V-Cl-Lo-0
2
F/S
PMU
V-MU
MONITOR
EXT_FORCE
EXT_SENSE
DOUT_0
DOUT_1
-
CVB-0
+
+
-
CVA-0
CVB-1
CVA-1
-
CVA-PPMU-0
CVA-PPMU-1
+
+
-
CVB-PPMU-0
CVB-PPMU-1
FIGURE 1. BLOCK DIAGRAM
DVH-1
DVL-1
VTT-1
2
DATA_1
2
EN_1
2
COMP_B_1
2
F/S
V-MU
PMU
COMP_A_1
V-FI-1
V-FV-1
V-Cl-Hi-1
V-Cl-Lo-1
March 17, 2011
1
FN7816.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.