ISL55002_06 Datasheet, PDF (1/12 Pages) Intersil Corporation – High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier

®
Data Sheet
July 27, 2006
ISL55002
FN7497.4
High Supply Voltage 200MHz Unity-Gain
Stable Operational Amplifier
The ISL55002 is a high speed, low power, low cost
monolithic operational amplifier. The ISL55002 is unity-gain
stable and features a 300V/µs slew rate and 200MHz
bandwidth while requiring only 8.5mA of supply current per
amplifier.
The power supply operating range of the ISL55002 is from
±15V down to ±2.5V. For single-supply operation, the
ISL55002 operates from 30V down to 5V.
The ISL55002 also features an extremely wide output
voltage swing of -12.75V/+13.4V with V_S = ±15V and
R_L = 1kΩ.
At a gain of +1, the ISL55002 has a -3dB bandwidth of
200MHz with a phase margin of 55°. Because of its
conventional voltage-feedback topology, the ISL55002 allow
the use of reactive or non-linear elements in its feedback
network. This versatility combined with low cost and 140mA
of output-current drive makes the ISL55002 an ideal choice
for price-sensitive applications requiring low power and high
speed.
The ISL55002 is available in an 8 Ld SO package and is
specified for operation over the full -40°C to +85°C
temperature range.
Ordering Information
PART NUMBER
TAPE
PART
&
MARKING REEL
PACKAGE
PKG.
DWG. #
ISL55002IB
55002IB
- 8 Ld SO
MDP0027
ISL55002IB-T7 55002IB
7” 8 Ld SO
MDP0027
ISL55002IB-T13 55002IB 13” 8 Ld SO
MDP0027
ISL55002IBZ
(See Note)
55002IBZ
- 8 Ld SO
(Pb-Free)
MDP0027
ISL55002IBZ-T7 55002IBZ
(See Note)
7” 8 Ld SO
(Pb-Free)
MDP0027
ISL55002IBZ-T13 55002IBZ 13” 8 Ld SO
(See Note)
(Pb-Free)
MDP0027
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• 200MHz -3dB bandwidth
• Unity-gain stable
• Low supply current: 8.5mA per amplifier
• Wide supply range: ±2.5V to ±15V dual-supply and 5V to
30V single-supply
• High slew rate: 300V/µs
• Fast settling: 75ns to 0.1% for a 10V step
• Wide output voltage swing: -12.75V/+13.4V with
V_S = ±15V, R_L = 1kΩ
• Enhanced replacement for EL2244
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Single-supply amplifiers
• Active filters/integrators
• High speed sample-and-hold
• High speed signal processing
• ADC/DAC buffers
• Pulse/RF amplifiers
• Pin diode receivers
• Log amplifiers
• Photo multiplier amplifiers
• Difference amplifiers
Pinout
ISL55002
(8 LD SO)
TOP VIEW
OUT 1
IN1- 2
IN1+ 3
VS- 4
-+
+-
8 VS+
7 OUT2
6 IN2-
5 IN2+
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005-2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.