ISL55001 Datasheet, PDF (1/12 Pages) Intersil Corporation – High Supply Voltage 220MHz Unity-Gain Stable Operational Amplifier

High Supply Voltage 220MHz Unity-Gain Stable
Operational Amplifier
ISL55001
The ISL55001 is a high speed, low power, low cost
monolithic operational amplifier. The ISL55001 is
unity-gain stable and features a 300V/µs slew rate and
220MHz bandwidth while requiring only 9mA of supply
current.
The power supply operating range of the ISL55001 is
from ±15V down to ±2.5V. For single-supply operation,
the ISL55001 operates from 30V down to 5V.
The ISL55001 also features an extremely wide output
voltage swing of -12.75V/+13.4V with V_S = ±15V and
R_L = 1kΩ.
At a gain of +1, the ISL55001 has a -3dB bandwidth of
220MHz with a phase margin of 50°. Because of its
conventional voltage-feedback topology, the ISL55001
allows the use of reactive or non-linear elements in its
feedback network. This versatility combined with low
cost and 140mA of output-current drive makes the
ISL55001 an ideal choice for price-sensitive applications
requiring low power and high speed.
The ISL55001 is available in an 8 Ld SO package and
specified for operation over the full -40°C to +85°C
temperature range.
Ordering Information
PART
PACKAGE
PKG.
PART NUMBER MARKING (Pb-free) DWG. #
ISL55001IBZ
(Note 2)
55001 IBZ 8 Ld SO
M8.15E
ISL55001IBZ-T7 55001 IBZ 8 Ld SO
(Note 1, 2)
M8.15E
ISL55001IBZ-T13 55001 IBZ 8 Ld SO
(Notes 1, 2)
M8.15E
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die
attach materials, and 100% matte tin plate plus anneal
(e3 termination finish, which is RoHS compliant and
compatible with both SnPb and Pb-free soldering
operations). Intersil Pb-free products are MSL classified
at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
3. For Moisture Sensitivity Level (MSL), please see device
information page for ISL55001. For more information on
MSL please see techbrief TB363.
Features
• 220MHz -3dB Bandwidth
• Unity-gain Stable
• Low Supply Current: 9mA @ V_S = ±15V
• Wide Supply Range: ±2.5V to ±15V Dual-Supply and
5V to 30V Single-Supply
• High Slew Rate: 300V/µs
• Fast Settling: 75ns to 0.1% for a 10V Step
• Wide Output Voltage Swing: -12.75V/+13.6V with
V_S = ±15V, R_L = 1kΩ
• Low Cost, Enhanced Replacement for the EL2044
• Pb-free (RoHS compliant)
Applications
• Video Amplifiers
• Single-supply Amplifiers
• Active Filters/Integrators
• High Speed Sample-and-Hold
• High Speed Signal Processing
• ADC/DAC Buffers
• Pulse/RF Amplifiers
• Pin Diode Receivers
• Log Amplifiers
• Photo Multiplier Amplifiers
• Difference Amplifier
Pin Configuration
ISL55001
(8 LD SO)
TOP VIEW
NC 1
8 NC
IN- 2
-
+
IN+ 3
7 VS+
6 OUT
VS- 4
5 NC
November 3, 2009
FN6200.3
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005, 2006, 2008, 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.